JNCIS-SP JN0-362 Dumps Full Questions with Free PDF Questions to Pass
100% Updated Juniper JN0-362 Enterprise PDF Dumps
NEW QUESTION 19
Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel? (Choose two.)
- A. It decrements the time-to-live (TTL) counter by one in the inner IP header
- B. It creates and adds a new inner IP header with the remote destination device's IP address
- C. It adds an outer IP header with the destination address of the remote tunnel endpoint
- D. It modifies the source and destination addresses in the inner IP header
Answer: A,C
NEW QUESTION 20
Click the Exhibit button.
You are troubleshooting a new BGP peering session which is not establishing. Referring to the exhibit, which statement is true?
- A. The peer's AS number is misconfigured
- B. The neighbor does not support IPv6
- C. The update messages contain an unsupported option
- D. The TCP session is not establishing
Answer: A
NEW QUESTION 21
In your RSVP network you have configured three separate LSPs to the same egress address. You have made no other configuration changes to the forwarding decisions made by the router.Which commands can you use to determine which LSP is being used to forward packets?
- A. show rsvp session
- B. show route table inet.4
- C. show route table inet.3
- D. show rsvp neighbor
Answer: C
NEW QUESTION 22
To which multicast address is a VRRP advertisement packet sent?
- A. 224.0.0.6
- B. 224.0.0.13
- C. 224.0.0.18
- D. 224.0.0.22
Answer: C
NEW QUESTION 23
Click the Exhibit button. The policy shown in the exhibit has been configured and installed on your router.
What is the result of applying this policy?
- A. The 172.18.1.0/32 network will be redistributed into OSPF as an external route.
- B. The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.
- C. The 172.18.1.0/24 network will be redistributed into OSPF as an external route.
- D. The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.
Answer: C
NEW QUESTION 24
Click the exhibit.
You have configured OSPF between two routers. The OSPF adjacency will not form.
Referring to the exhibit, what is the problem?
- A. Router is not receiving hellos on the configured interface.
- B. The OSPF version does not match on the configured interfaces.
- C. The area does not match on the configured interfaces.
- D. The router is not sending hellos on the configured interface.
Answer: C
NEW QUESTION 25
Click the Exhibit button. Given the OSPF topology shown in the exhibit, how many unique link-state databases are present in the network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 26
Click the Exhibit button.
Which type of route is shown in the exhibit?
- A. generate
- B. static
- C. aggregate
- D. kernel
Answer: A
NEW QUESTION 27
Which two fields of a hello packet must match on both routers when forming an OSPF adjacency? (Choose two.)
- A. Router priority
- B. Designated route
- C. Network mask
- D. Hello interval
Answer: C,D
NEW QUESTION 28
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. R1 is an ABR
- B. R2 is an ABR
- C. R2 is an ASBR
- D. R1 is a backbone router
Answer: B
NEW QUESTION 29
Click the exhibit.
You are asked to enable a new BGP connection on R1, which has an existing IPv4 peering with R2. The new peering with R3 will use IPv6.
Referring to the exhibit, which two steps are required to enable the new IPv6 peering? (Choose two.)
- A. Configure an IPv6 local address under the BGP group.
- B. Configure the rib inet6.0 statement under the BGP group.
- C. Configure an IPv6 address on the appropriate interface.
- D. Configure an IPv6 neighbor address under the BGP group.
Answer: C,D
NEW QUESTION 30
Which two statements are correct about default BGP route propagation? (Choose two.)
- A. IBGP speakers advertise EBGP-learned routes to other IBGP peers.
- B. EBGP speakers advertise IBGP-learned routes to other EBGP peers.
- C. EBGP speakers advertise IBGP-learned routes to other EBGP peers by using apolicy.
- D. IBGP speakers advertise IBGP-learned routes to other IBGP peers.
Answer: A,C
NEW QUESTION 31
Which statement is true about GRE encapsulation?
- A. Only the IP header is encapsulated by GRE.
- B. The entire packet is encapsulated by GRE.
- C. Only the IP payload is encapsulated by GRE.
- D. The entire frame is encapsulated by GRE.
Answer: A
NEW QUESTION 32
Click the exhibit.
Customer 1 has experienced some hardware failures that erroneously transitioned some links into a forwarding state, as shown in the exhibit.
In this scenario, which STP feature set would solve this problem?
- A. Loop protection
- B. Root protection
- C. BPDU protection
- D. MAC movement protection
Answer: A
NEW QUESTION 33
By default, which BGP attribute is only compared when two route advertisements are received from the same neighboring AS?
- A. AS-Path
- B. Communities
- C. MED
- D. Next Hop
Answer: C
NEW QUESTION 34
You must establish an MPLS LSP between two locations. You are required to ensure that the LSP traverses specific routers within the network.
Which solution is correct in this scenario?
- A. Implement RSVP and define the explicit route the LSP must follow
- B. Enable traffic engineering within RSVP and enable the Fast Reroute feature
- C. Enable traffic engineering within LDP and define the explicit route the LSP must follow
- D. Implement LDP and define the explicit route the LSP must follow
Answer: A
NEW QUESTION 35
Which statement about a virtual-router type of routing instance is correct?
- A. It is used to separate large networks into smaller administrative entities
- B. It is the only routing instance type supported on Junos devices
- C. It is used to create and maintain separate routing and forwarding tables
- D. It is used in Layer 3 VPN implementations
Answer: C
NEW QUESTION 36
What are three ways to configure IPv6 addresses in your network? (Choose three.)
- A. Statically configure your IPv6 addresses.
- B. Configure your IPv6 addresses by configuring support for unicast-arp-negotiation.
- C. Configure your IPv6 addresses using stateless auto configuration.
- D. Configure your IPv6 addresses by assigning your router a prefix list.
- E. Configure your IPv6 addresses by setting up a DHCPv6 server.
Answer: A,C,E
NEW QUESTION 37
Click the Exhibit.
On an MX Series device, you must enable routing between VLANs 100,200, and the Internet ge-
5/1/0, and ge-5/1/2 are bundled into interface ae3. Ge-5/1/4, and ge-5/1/5 are bundles into interface ae2. Both AE bundles trunk VLANs 100 and 200.
In this scenario, what is the correct configuration snippet for VLAN 100?
- A. interfaces {xe-2/1/0{unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0{unit 0{family inet
{address 10.0.1.2/24;}}unit 1{family inet {address 10.0.2.2/24;}}}}bridge-domains {vlan-
100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;interface ip-0/0/0.0;}} - B. interfaces {xe-2/1/0 {unit 0{family inter {address 10.0.10.2/24;}}}irb {unit 0{family inet {address
10.0.1.2/24;}}unit 1 family inet {address 10.0.2.2/24;}}}}bridge-domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;routing-interface irb.0;}} - C. interfaces {xe-2/1/0 {unit 0 {family inet {address 10.0.10.2/24;}}}irb {unit 0{family inet {address
10.0.1.2/24:}}unit 1 {family inet {address 10.0.2.2/24;}}}}bridge-domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;}} - D. interfaces {xe-2/1/0 {unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0 {unit 0 {family inet
{address 10.0.1.2/24;}}unit 1 {family inet {address 10.0.2.2/24;}}}}bridge-domains {vlan-
100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface xe-2/1/0.0;interface ae1.100;interface ae3.100interface ip-0/0/0.0;}}
Answer: C
NEW QUESTION 38
You have a stub OSPF area running in your network. Your supervisor has asked you to build a virtual link across this area to connect new equipment acquired in a recent ISP acquisition.Which statement is correct about this scenario?
- A. Type 5 LSAs would be seen only in the newly attached area.
- B. Type 5 LSAs would be blocked in a stub area.
- C. Type 5 LSAs would carry external information across your transit area to the backbone.
- D. Type 5 LSAs would be converted to type 7 LSAs.
Answer: B
NEW QUESTION 39
What are two methods for decreasing the size of an OSPF link-state database (LSDB)? (Choose two.)
- A. Segment large groups of routers into areas.
- B. Change a stub area to NSSA when possible.
- C. Ensure that all routers on a shared segment are configured with a priority value of 0.
- D. Use an interface type of p2p when possible.
Answer: A,D
NEW QUESTION 40
Click the Exhibit.
The router with the configuration shown in the exhibit has two interfaces, both of which are operational and can pass traffic. These interfaces are connected to two different routers, both of which are configured for OSPF area 0.0.0.1. The router has received LSAs and can now send traffic into the backbone area.
Which two statements are correct? (Choose two.)
- A. The router is an ASBR.
- B. The router has two OSPF adjacencies.
- C. The router is an ABR.
- D. The router has only a single OSPF adjacency.
Answer: C,D
NEW QUESTION 41
Which two statements are true about IP and GRE tunnels? (Choose two.)
- A. The protocol field is changed in the inner IP packet header
- B. Tunnel traffic is encrypted
- C. The TTL field is changed in the inner IP packet header
- D. Tunnel endpoints need a valid route to the remote endpoint
Answer: C,D
NEW QUESTION 42
Which two IP addresses are considered Martian addresses? (Choose two.)
- A. 169.254.0.0/16
- B. 240.0.0.0/4
- C. 0.0.0.0/8
- D. 192.168.0.0/8
Answer: B,C
NEW QUESTION 43
......
Difficulty in writing JN0-362 Exam
Candidates already have experience and are networking professionals with beginner to intermediate knowledge with switching and routing experience so it is not difficult to pass the certifications. JN0-362 dumps and JN0-362 practice exams to revise the already discussed syllabus.
Understanding functional and technical aspects of Intermediate System to Intermediate System (IS-IS)
The following will be discussed in JN0-362 dumps:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
- IS-IS PDUs
- Levels and areas
- Route/path selection process
- Identify the concepts, operation, or functionality of BGP
- BGP basic operation
- Groups and peers
- Routing policy application
- Levels, interfaces and adjacencies
- Border Gateway Protocol (BGP)
- TLVs
- Metrics
- BGP message types
- Routing policy application
- Link-state database
- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
- Additional basic options
- Additional basic options
- Adjacencies and neighbors
- Troubleshooting tools
- Identify the concepts, operation, or functionality of IS-IS
- Attributes
- IBGP and EBGP functionality and interaction
- Designated intermediate system (DIS)
3. Junos MPLS Fundamentals (JMF)
This is the last course that’s directly related to the Juniper JN0-362 exam. Similarly, it has a duration of 2 days and is meant to give candidates an upper hand when preparing for their exams by focusing on Multiprotocol Label Switching (MPLS). It starts by introducing the essential MPLS concepts such as the structure of the MPLS header and MPLS forwarding. Then, it addresses the configuration and operation of LDP and RSVP. What’s more, this training option gives special attention to the topics of MPLS traffic protection and traffic engineering including link/node protection, LDP loop-free alternate, and fast reroute. Throughout the training, the concepts you learn will be put to good use through a series of demonstrations and hands-on labs to help you gain critical experience in the configuration and monitoring of MPLS on devices running Junos OS. In general, the class content can be summarized into two sections for the first and second days. Thus, the content to be covered on the first day includes the course introduction alongside MPLS Fundamentals, Label Distribution Protocols, and Routing Table Integration. On the other hand, day 2 focuses on Constrained Shortest Path First, Traffic Protection and LSP Optimization, Fate Sharing, and Miscellaneous MPLS features.
Use Valid Exam JN0-362 by BraindumpQuiz Books For Free Website: https://www.braindumpquiz.com/JN0-362-exam-material.html