HP HPE0-J58 Exam Preparation Guide and PDF Download
Verified & Correct HPE0-J58 Practice Test Reliable Source May 19, 2022 Updated
HP HPE0-J58 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 47
A customer needs to analyze performance and capacity of their storage environment. Their environment consists of HPE 3PAR, EMC VNX, and Pure Systems.
Which tool should you use to begin your assessment of their environment?
- A. NinjaCrawler
- B. SAF Collect
- C. HPE Infosight
- D. DD Analyzer
Answer: B
NEW QUESTION 48
An HPE Nimble customer needs to consolidate storage and scale performance. They are looking to purchase additional hardware to meet these requirements.
What is the best solution to offer this customer?
- A. Add additional HBAs in the arrays
- B. Use multi-array storage pools
- C. Add additional SSDs to the cache
- D. Use multiple single-array storage pools
Answer: D
NEW QUESTION 49
A customer recently acquired another company located less than three km from their current main location.
Both locations use HPE D-Series products in their storage environments.
The customer needs to merge the two locations while still using the current WAN and networking infrastructure at both locations. They need to Keep the initial cost down until they are able to redesign both networking infrastructures When providing a proposal, which protocol should be incorporated to meet the customer needs?
- A. ISCSI
- B. FCIP
- C. CWDM
- D. DWDM
Answer: C
NEW QUESTION 50
You are using NinjaStars to develop a proposal to refresh a customer's storage infrastructure.
Which information is needed from the existing environment to properly design a solution? (Select two.)
- A. visualization ratio
- B. RAID type
- C. number of Installed controllers
- D. response time
- E. total IOPS
Answer: B,E
NEW QUESTION 51
A customer has a requirement to provide Disaster Recovery for an application that is very sensitive to IO latency.
The customer has specified an RPO of less than 3 minutes for this application.
How can HPE 3PAR Remote Copy help meet the customers specified requirements?
- A. by using Synchronous Long Distance Mode
- B. by using Asynchronous Streaming Replication
- C. by using Periodic Asynchronous Replication with an interval of 3 mins
- D. by using Synchronous Replication
Answer: B
NEW QUESTION 52
A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence.
What should you recommend to the customer?
- A. The Quorum Witness should be in the primary data center, with FC connectivity to the HPE 3PAR there
- B. The Quorum Witness should be in a third data center, with FC connectivity to both HPE 3PARs
- C. The Quorum Witness should be in the secondary data center, with IP connectivity to the HPE 3PAR there
- D. The Quorum Witness should be in a third data center, with IP connectivity to both HPE 3PARs
Answer: B
NEW QUESTION 53
A customer owns a Storeonce 6500 and wants to use HPE StoreOnce Cloud Bank Storage.
What is the lowest cost Implementation for CloudBank?
- A. StoreOnce VSA running firmware 3.18 onwards
- B. StoreOnce 3100
- C. a RAM expansion on the existing StoreOnce 6500
- D. StoreOnce 6500
Answer: A
NEW QUESTION 54
What is one of the advantages of protecting HPE 3PAR File Persona with RMC?
- A. MS SQL data consistency is provided
- B. Single file recovery is possible
- C. Backup throughput will be considerably faster than other backup methods
- D. Transparent failover is offered If clients are using SMB 3.0, even if you recover to another 3PAR
Answer: C
NEW QUESTION 55
A customer has two data centers in a metropolitan area. The link between the data centers is IP-based and satisfies the bandwidth and latency requirements. They have the following requirements:
Transparently and automatically failover and fall back between sites
Provide block and file access
Block access must provide connectivity for fibre channel and iSCSi hosts
All-Flash storage solution
You plan to propose a design based on HPE 3PAR storage arrays.
What would be the most cost-effective model that meets the customer needs?
- A. HPE 3PAR 20450
- B. HPE 3PAR 9450
- C. HPE 3PAR 20850
- D. HPE 3PAR 8450
Answer: D
NEW QUESTION 56
You completed the HPE Nimble storage replication partnership in a customer environment.
When you test the network connection from the primary partner to the secondary partner, the test fails; when you test the connection from the secondary to the primary partner, the test is successful.
What is the most likely cause of the failure?
- A. The test can only be performed from the secondary array
- B. The secondary partner name is not configured properly
- C. The secondary array network ports are misconfigured
- D. The primary partner name is not configured properly
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 57
You receive an error when attempting to utilize SAF Analyze to upload customer data that you have collected to develop reports for a new proposal. What must you do first to begin the process?
- A. Create a single .zip file of all data exports
- B. Create a new opportunity
- C. Create a gatekeeper on your SAF utility server
- D. Export the data as .xml
Answer: A
NEW QUESTION 58
A customer requests a proposal for two HPE 3PAR arrays using asynchronous periodic replication. The customer has two data centers, and the current bandwidth available for replication between the data centers is
200 Mb/s.
The customer is replicating 30TB, and the change rate is 3% in 24 hours. The customer wants to achieve an RPO of 10 minutes.
Which statement about bandwidth and replication is true for the customer requirements?
- A. The bandwidth will have to be increased, and replication must happen every 5 minutes
- B. The bandwidth is sufficient, and replication must happen every 5 minutes
- C. The bandwidth is sufficient, and replication must happen every 10 minutes
- D. The bandwidth will have to be increased, and replication must happen every 10 minutes
Answer: A
Explanation:
Explanation
NEW QUESTION 59
A customer has two HPE 3PAR arrays which are using Remote Copy and AO. The customer notices a large portion of the data is residing in the NL tier of the secondary array, while all tiers are utilized evenly on the primary array. Which statement about the secondary array behavior is true?
- A. AO should not be used with Remote Copy configurations
- B. The NL CPG in the secondary array is larger
- C. There is an improper AO configuration on the secondary array
- D. This is normal behavior for AO
Answer: D
NEW QUESTION 60
A customer is experiencing high utilization on their VMware ESXi server NICs when they backup virtual machines stored on an HPE 3PAR 8200.
Which technology is available on a StoreOnce VSA to reduce the network utilization?
- A. Backup from storage snapshots
- B. Adaptive Data Reduction
- C. Catalyst target-side deduplication
- D. Transportable shadow copies
Answer: C
NEW QUESTION 61
A customer experiences a performance issues and blames the HPE 3PAR array. However, you suspect it is caused by a noisy neighbor situation in the VMware environment. Which approach should you use to find and prove a root cause?
- A. Use HPE InfoSight Cross Stack Analytics
- B. Use the advanced performance reports in SSMC
- C. Use Brocade Network Advisor to gather data for analysis
- D. Use HPE SAF Collect to gather data for SAF Analyze
Answer: A
NEW QUESTION 62
A customer has a Tier 1 application that has high bandwidth and is sensitive to latency.
The customer needs a solution to support this application. The solution must support replication between two sites over dark fiber links and support an RPO of zero.
Which solution meets the customer requirements?
- A. dual Nimble HF20 arrays with data replicated over iSCSI
- B. dual HPE 3PAR 9450 arrays with data replicated using RCFC
- C. dual HPE 3PAR 8400 arrays with data replicated using iSCSI
- D. dual Nimble AF40 arrays with data replicated over FC
Answer: C
NEW QUESTION 63
A customer is considering an upgrade. The company currently uses host-based data replication .You propose an HPE 3PAR multi-site solution, including RCIP and Peer Persistence.
Which advantage of the HPE 3PAR based replication solution should you emphasize?
- A. It will free host CPU cycles, which are then available to applications.
- B. it can duplicate the data on the HBA and networking layer
- C. It uses a full-mesh network topology to distribute the data
- D. It can increase the available bandwidth for the replication solution
Answer: A
NEW QUESTION 64
Refer to the exhibit.
A customer requests a solution for two 3PAR 8450 storage arrays using synchronous replication. The customer wants the array configured to...
A junior architect you are coaching created the configuration shown for each array What should you add to me configuration for each array to meet customer performance requirements?
- A. 1 additional pair of nodes
- B. 4 additional disk enclosures
- C. 32 additional SSD drives
- D. SAS bus multiplexers
Answer: A
NEW QUESTION 65
......
Pass HP HPE0-J58 exam Dumps 100 Pass Guarantee With Latest Demo: https://www.braindumpquiz.com/HPE0-J58-exam-material.html
Free HP HPE0-J58 Exam Files Downloaded Instantly: https://drive.google.com/open?id=1Imyc_sh-o0mgOYwbBoxJmUNoxQUIzkbW