[Full-Version] 2021 New BraindumpQuiz NS0-176 PDF Recently Updated Questions
NS0-176 Exam with Guarantee Updated 141 Questions
NetApp NS0-176 Exam Topics:
| Section | Objectives |
|---|---|
| FlexPod Administration | - Demonstrate knowledge of how to administer FlexPod solutions according to FlexPod best practices - Describe FlexPod management applications - Demonstrate knowledge of how to install and upgrade the FlexPod solution |
| FlexPod Troubleshooting | - Demonstrate how to perform FlexPod troubleshooting |
| FlexPod Configuration | - Describe how to install and configure the FlexPod components - Describe how to configure neworks in a UCS solution - Describe how to configure SAN boot in a FlexPod solution - Describe knowledge of how to configure a service profile - Demonstrate knowledge of how to configure storage in a FlexPod solution - Demonstrate knowledge of how to configure Cisco Nexus switches |
| FlexPod Design | - Describe the storage components supported in FlexPod - Describe the networking components supported in FlexPod - Describe the compute components supported in FlexPod |
| Information Gathering for FlexPod Solutions | - Describe the main FlexPod components |
NetApp NS0-176 Exam Certification Details:
| Exam Code | NS0-176 FlexPod |
| Exam Name | Cisco and NetApp FlexPod Implementation and Administration |
| Sample Questions | NetApp NS0-176 Sample Questions |
| Exam Price | $150 USD |
| Exam Registration | PEARSON VUE |
| Number of Questions | 60 |
| Passing Score | 68% |
| Duration | 60 minutes |
NEW QUESTION 59
Your customer has the storage configuration for a FlexPod solution shown below.
- FAS8040 HA-pair
- Disk stack one-4x DS4243 disk shelves (2TB SATA disk drives)
- Disk stack two- 2x DS 2246 disk shelves (1.2TB disk drives)
- There are no unused SAS ports on either controller
- There are no expansion slots available on either controller
The customer wants to attach a single DS2246 disk shelf with 800 GB SSD drives.
In this scenario, what are two ways to connect the new shelf for optimal performance? (Choose two).
- A. Cable a new stack for the SSD shelf.
- B. Cable the new shelf to the end of stack two.
- C. Cable the new shelf to the beginning of stack two.
- D. Cable the new shelf to the end of stack one.
Answer: A,C
NEW QUESTION 60
Exhibit:
Referring to the exhibit, which two diagrams show the correct way to cable a new NetApp clustered Data ONTAP cluster with two nodes? (Choose two.)
- A. I
- B. IV
- C. III
- D. II
Answer: C,D
NEW QUESTION 61
On a NetApp clustered Data ONTAP cluster, a volume named datastorel resides on an aggregate named node1 aggr1 and is mounted into the namespace at the junction path /esx cluster1/ds1.
A VMware virtual machine file named myhost.vmdk is at the root of the volume datastorel. A volume move operation relocates the datastorel volume to an aggregate named node3 aggr1.
In this scenario, what is the full path to the file myhost.vmdk after the volume move is complete?
- A. /esx_cluster1/datastore1/myhost.vmdk
- B. /esx_cluster1/ds1/myhost.vmdk
- C. node3_aggr3/esx_cluster1/ds1/myhost.vmdk
- D. /vo1/esx_cluster1/ds1/myhost.vmdk
Answer: B
NEW QUESTION 62
Exhibit:
You have a NetApp cluster and have just performed a storage failover giveback command from the CLI.
Referring to the exhibit, what is the status of the storage failover process?
- A. The giveback failed because cluster-01 was not able to communicate with the partner's cluster LIFs.
- B. The giveback is partially completed waiting for node cluster-02 to give back the partner's SFO aggregate.
- C. The giveback is partially completed waiting for node cluster-01 to give back the partner's SFO aggregate.
- D. The giveback failed because the partner node was not in a "waiting for "giveback" state.
Answer: B
NEW QUESTION 63
Which statement is true about NFS exports in Clustered Data ONTAP?
- A. Export policies are created and modified by editing /etc/exports on the node with the share.
- B. Export policies and rules need to be set at the data Vserver level and export policies are created and modified by editing /etc/exports on the node with the share.
- C. Export policies and rules need to be set at the data Vserver level.
- D. Exports can be either persistent or temporary.
- E. Exports can be either persistent or temporary, and export policies and rules need to be set at the data Vserver level.
Answer: C
NEW QUESTION 64
Which LIF role is used for SnapMirror traffic on a system running clustered Data ONTAP?
- A. cluster-management
- B. interconnect
- C. node-management
- D. intercluster
Answer: D
NEW QUESTION 65
An administrator has a FlexPod solution with VMware vSphere. The administrator is migrating all network traffic from standard switches to vSphere distributed switches.
Virtual machines (VMs) are currently using VM port groups called VLAN_500 and VLAN_501 on standard virtual switch vSwitch3. A new distributed switch called dvSwitch_VM is created and new distributed port groups are configured for each VM traffic VLAN. VMs are configured to use the new port groups.
After the change, VMs on VLAN 501 report a loss of network connectivity; however, VMs on VLAN 500 are not showing any connectivity issues. The symptoms are experienced for VMs on all ESXi hosts.
Which action must the administrator perform to solve the problem?
- A. Reboot the virtual machines to re-establish network connectivity.
- B. Create a new vmkernel port on dvSwitch_VM for VLAN 501.
- C. Configure the dvSwitch_VM port binding to Ephemeral.
- D. Add the correct VLAN ID to the new distributed port group for VLAN 501.
Answer: C
NEW QUESTION 66
Which FlexPod management tool allows you to manage Storage Virtual Machines (SVMs) and replication relationships?
- A. OnCommand Insight
- B. OnCommand System Manager
- C. OnCommand Performance Manager
- D. OnCommand Balance
Answer: B
NEW QUESTION 67
An administrator just finished installing Windows Server 2012 (Core) with Hyper-V.
Now the administrator must deploy a new VM using PowerShell with the parameters shown below.
--Name: web server
--Memory: 10 GB
--Hard Drive: Existing Disk (d:\vhd\BaseImage.vhdx)
Which PowerShell command creates the VM based on the Information in the scenario?
- A. New-VM-Name "web server"- MemoryStartupbytes 10 GB - VHDPath d:\vhd\BaseImage.vhdx -NewVHDSireBytes 6000000
- B. New-VM-Name web server-MemoryStartupbytes 1 GB- VHDPath BaseImage.vhdx
- C. New-VM-Name "web server" - MemoryStartupbytes 10 GB- VHDPath d:\vhd\BaseImage.vhdx
- D. new- VM- Name web server- MemoryStartupBytes 10GB- VHDPath BaseImage.vhdx
Answer: C
NEW QUESTION 68
Exhibit:
Referring to the exhibit, what do the asterisks on the left indicate about the output of the ~show zoneset active~ command?
- A. The device is currently logged in.
- B. The device is not currently logged in.
- C. A redundant path is present.
- D. Only a single path is present.
Answer: A
NEW QUESTION 69
Which two are correct about VSAN configuration within UCS Manager? (Choose two)
- A. In addition to SAN tab, VSANs can be configured under UCSM Server tab as well.
- B. VSAN ID and FCoE VLAN ID have to match.
- C. VSAN can be configured as a global parameter.
- D. VSAN can be configured as fabric interconnect specific.
- E. VSAN IDs 3840-4079 are not available regardless of the Fabric Interconnect mode.
- F. We can delete VSAN 1.
Answer: D,F
NEW QUESTION 70
Which four items are required in order to create a Gold Master Boot LUN to automate the provisioning of Hyper-V hosts using the built-in LUN cloning capabilities of NetApp storage? (Choose four.)
- A. SysPrep of the server operating system
- B. Create a new interface group on the NetApp Cluster
- C. Creation of a service profile and zoning for Gold Master Boot LUN
- D. Create additional virtual fibre channel (vfc) interfaces for the Nexus 5500
- E. Creation of a LUN for the Gold Master Boot LUN
- F. Configuration of the Server OS and hotfix installation
Answer: A,C,E,F
NEW QUESTION 71
You have a two-node NetApp clustered Data ONTAP storage system, a Cisco UCS system with two Fabric Interconnects, and a dual-fabric (Fabric-A and Fabric-B) Fibre Channel topology with the information shown below.
- Node 01 has one 10Gb FCoE connection to Fabric-A and one 10Gb FCoE connection to Fabric-B.
- Node 02 has one 10Gb FCoE connection to Fabric-A and one 10Gb FCoE connection to Fabric-B.
- Fabric Interconnect A has a two-port FCoE port channel to Fabric-A
- Fabric Interconnect B has a two-port FCoE port channel to Fabric-B.
- Each IOM in the Cisco UCS blade chassis has four uplinks into the Fabric Interconnects.
- A service profile running VMware ESXi has one vHBA in Fabric-A and one vHBA in Fabric-B.
How many paths should ESXi see to its FC boot LUN?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 72
A customer wants to reuse existing networking equipment that was pulled from another data center for a new FlexPod Datacenter solution. They want to know if their switch models are supported.
In this scenario, which two switch models will accomplish this task? (Choose two.)
- A. Cisco Nexus 9396PX
- B. Cisco MDS 9250i
- C. Cisco Catalyst 6504
- D. Cisco Catalyst 9300-48P
Answer: A,B
NEW QUESTION 73
Which management tool is used to configure and monitor centralized policies for multiple Cisco UCS domains?
- A. UCS Performance Manager
- B. UCS Manager
- C. UCS Director
- D. UCS Central
Answer: D
NEW QUESTION 74
Your primary VSM needs to be edited, rebooted, or migrated. You need to initiate a manual switchover to your standby VSM.
What command will allow this to occur?
- A. vsm switchover
- B. System switchover
- C. System standby
- D. Standby activate
Answer: B
NEW QUESTION 75
Exhibit:
You just finished cabling a UCS 5108 chassis to the Fabric Interconnects.
Which diagram in the exhibit is cabled correctly according to the CVD guidelines?
- A. I
- B. II
- C. IV
- D. III
Answer: C
NEW QUESTION 76
Which two statements about HA pairs in a NetApp cluster are true? (Choose two.)
- A. HA pairs in the same chassis are not connected to each other through an HA interconnect.
- B. Non-disruptive aggregate relocation can be performed between HA pairs without a takeover and giveback.
- C. In the event of a storage failover, the surviving node provides read/write access to the partner's disks until the failed node becomes available again.
- D. In the event of a storage failover, the surviving node always takes over the partner's data LIFs.
Answer: C,D
NEW QUESTION 77
Your UCS environment has recently been upgraded to include UCS B-Series Servers, UCS C-Series Servers, a UCS mini, and a fourth UCS domain. With these new changes, you need a management tool to help you manage the entire environment from a single location.
In this scenario, which tool would you use?
- A. Cisco Smart Advisor
- B. UCS Manager
- C. UCS Director
- D. UCS Central
Answer: D
NEW QUESTION 78
How many cluster interconnect switch(es) are required for a 4-node NetApp cluster?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: D
NEW QUESTION 79
Exhibit:
Which Cisco switch is shown in the exhibit?
- A. Nexus 5596
- B. Nexus 5548
- C. Nexus 7004
- D. Nexus 2232
Answer: B
NEW QUESTION 80
......
Latest NS0-176 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.braindumpquiz.com/NS0-176-exam-material.html