Best Quality HPE0-J68 Exam Questions HP Test To Gain Brilliante Result!
Preparations of HPE0-J68 Exam 2021 HPE ASE Unlimited 122 Questions
NEW QUESTION 36
A customer with several HPE 3PAR StoreServ arrays has reported latencies with newly updated applications.
You have proposed changes to the AO configuration and need to provide high-resolution reports on how the change has affected the latencies.
What should you propose on delivering the service time and I/O workload information daily for you and the customer?
- A. Use IMC to schedule performance data gathering and email delivery.
- B. Schedule SSMC System Reporter to send the defined email reports.
- C. Enable the Service Processor to gather Performance data and schedule data transfer.
- D. Login to InfoSight and analyze Advanced Performance history.
Answer: D
NEW QUESTION 37
Which value does an HPE Nimble solution provide in addition to other HPE storage solutions
- A. Flat support pricing for all hardware components
- B. Upfront option for free controller upgrade after 3 years
- C. All inclusive software licensing over 5 years and additional capacity upgrades
- D. Tier 1 and tier 2 phone support
Answer: D
NEW QUESTION 38
What performance benefit is provided by using the HPE StoreVirtual DSM for Microsoft MPIO instead of the standard MPIO?
- A. The iSCSI connections are blocked to non-critical nodes in the cluster by default.
- B. The storage system, which receives a copy of the data, does not service the write I/O.
- C. The HPE DSM increases availability and reduces latency and throughput.
- D. The storage system, which holds a copy of the requested data, services the read I/Os.
Answer: D
NEW QUESTION 39
A customer asks for an integrated solution for their remote office with All-Flesh storage and ease of management. Application-aware replication to their main office is an important requirement.
Which HPE solution component should you discuss with the customer first?
- A. HPE Nimble CS1000 system
- B. HPE MSA 2052 Storage
- C. HPE 3PAR StoreServ 8200
- D. HPE SimpliVity 380
Answer: D
NEW QUESTION 40
A customer has a new Nimble CS3000 21T storage systems and is facing latency issues for his 2TB ERP database. What would be a design approach to solve this issue ?
- A. Enable storage tiering on the system and map the volume to the new tier
- B. Perform controller upgrade to a Nimbel CS3000 storage systems
- C. Add additional SSd drives as cache to the system and PIN the volume
- D. Change RAID of the drives to RAID -1and setup quality of services for the volume
Answer: C
NEW QUESTION 41
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICs are included in the configuration. You designed an Intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statement is correct when discussing the IRF limits for this configuration?
- A. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.
- B. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.
- C. A maximum of two switches can be used in an IRF stack when connecting storage.
- D. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.
Answer: B
NEW QUESTION 42
A customer want to implement a virtualized environment and want to provide independent storage access to individual virtual servers. Which feature need to enabled on the B-series FC switches to support this solution?
- A. NPIV
- B. FCIP
- C. RSCN
- D. ALPA
Answer: A
NEW QUESTION 43
A customer has an existing configuration consisting of first class and nearline SAS drive in an 8000 SFF enclosure. They add two SFF 8000enclosure that are fully populated with nearline drives to an existing HPE 3Par storeserv 8400 array. What should the customer do to optimize their storage configuration?
- A. Run tunesys and on the array (275)
- B. Create new CPG for the newly installed drivers
- C. Enable space reclamation
- D. Defrag the CPG and run align drive on their system
Answer: A
NEW QUESTION 44
Which value does a Nimble solution provide in addition to other HPE storage solutions?
- A. Flat support pricing for all hardware components
- B. Upfront option for free controller upgrade after 3 years
- C. All-inclusive software licensing over 5 years and additional capacity upgrades
- D. Future-proofed for newer technologies
Answer: D
NEW QUESTION 45
A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD's configured with RAID5 7+1. They plan to add four more 3.84 TB SSD's.
What needs to be changed on the configuration once the new SSD's are installed?
- A. Change the cpg setsize to RAID5 5+1 and run tunesys.
- B. Change the availability level from cage to magazine.
- C. Adjust the cpg growth value to match amount of SSD's.
- D. Reconfigure the cpg setsize as RAID6 6+2 and wait for tunesys to complete.
Answer: A
NEW QUESTION 46
Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?
- A. Persistent port (96)
- B. Peer persistence
- C. Persistent Memory
Answer: A
Explanation:
D Persistent Cache
NEW QUESTION 47
Refer to the exhibit:
Which type of data format do you expect in the red rectangle?
- A. 94:b4:0f:cd:34:8a
- B. 172.16.31.11/24
- C. 20110002AC00736E235.524
- D. iqn.2015-02.com.hpe:oneview-vcgeDav000
Answer: C
NEW QUESTION 48
Which storage tool in the storage assessment foundry provide data protection analysis?
- A. Ninja protected+ (318)
- B. Ninja Thin
- C. Ninja Stars
- D. NinjaCrawler
Answer: A
NEW QUESTION 49
A customer currently has a CS1000H and wants to upgrade to a CS3000.
What must be considered before upgrading?
- A. A controller upgrade to a CS1000F has to be performed first.
- B. This upgrade is disruptive and needs planned downtime.
- C. A capacity upgrade to a fully populated array has to be performed first.
- D. Timeless storage support is not offered for CS1000H entry-level systems.
Answer: C
NEW QUESTION 50
A customer need to implement a new SAN fabric for their growing environment .The new SAN should provide a high performance and port-efficient network with many-to-many connectivity .Because of changing requirement and the possible acquisition of another company in the near future. The customer cannot predit the I/O traffic pattern within the SAN .The customer also concerned about availability. Which type of SAN topology should you recommend?
- A. Cascaded fabric
- B. Meshed fabric
- C. Core-edge fabric
- D. Single switch fabric
Answer: B
NEW QUESTION 51
You are designing a new HPE 3PAR StoreServ all-flash array for the customer.. Which ratio should you expect to have the highest efficiency?
- A. Reclamation ratio
- B. Thin provisioning ratio
- C. Compaction Ratio
- D. Read/write ratio
Answer: C
NEW QUESTION 52
A customer's environment consists of two HPE Synergy frames running VMware vSphere, HPE FlexFabric 5700 switches, and one HPE Nimble HF-series array connected via 10GbE-T ports to the FlexFabric switches. The customer is concerned about performance management of the whole solution stack.
When using infosight with VMvision and analyzing end-to-end latency, which of the components within the stack are displayed? (Choose Three)
- A. Ethernet network (LAN)
- B. host
- C. operating system
- D. ISCSI network(SAN)
- E. storage
- F. application
Answer: B,D,F
NEW QUESTION 53
A large organization is experiencing exponential data growth of object storage due to recent mergers and acquisition .They need an on-premise solution to optimize cost at petabyte scale Which components should you recommend for a software-defined solution ?(select two)
- A. HPE Complete -Scalability RING
- B. HPE complete -CTERA
- C. HPE Appolo 4510 server
- D. HPE 3PAR Storeserv 9450c
- E. HPE Synergy 660 Gen10 compute modules
Answer: A,C
NEW QUESTION 54
A customer need to server 40TB via file protocols including SMB and FTP to a board range of client operating system in one location .security protocol dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution you recommend?
- A. HPE MSA 2052 storage with HPE StoreEasy 3850 Gateway
- B. HPE StoreOnce 5500with data in fight encryption .
- C. HPE 3PAR 8200 using self-encrypting drive with 3PAR file persona
- D. HPE XP7 storage with encryption ready disk adapters
Answer: C
NEW QUESTION 55
A customer asks for a 50 TB disk-based backup solution with deduplication. They also need additional storage for test/dev purposes.
Which single HPE storage platform can you present to the customer that will meet both of their needs?
- A. HPE StoreOnce
- B. HPE StoreEasy Gateway
- C. HPE Nimble SF series
- D. HPE Nimble CS series
Answer: C
Explanation:
HPE quick specs , they also offer the flash-optimized performance needed to run development/test, QA, and analytics workloads on your backup data-plus production workloads when needed.
NEW QUESTION 56
......
Focus on HPE0-J68 All-in-One Exam Guide For Quick Preparation: https://www.braindumpquiz.com/HPE0-J68-exam-material.html
HPE0-J68 All-in-One Exam Guide For Quick Preparation: https://drive.google.com/open?id=1jmmnmFhRl6bxbw-lYwyJYkoyl9hVvREg