[2024] Pass your 350-801 exam with this 100% Free 350-801 Braindump
View All 350-801 Actual Exam Questions, Answers and Explanations for Free
Cisco 350-801 exam is a challenging test that requires a deep understanding of collaboration technologies and their operational aspects. It is recommended that candidates have at least three to five years of experience working with Cisco Collaboration solutions before attempting 350-801 exam. Candidates who pass the exam will have an industry-recognized certification that demonstrates their proficiency in implementing and operating Cisco Collaboration Core Technologies. Implementing and Operating Cisco Collaboration Core Technologies certification can help professionals advance their careers and open new opportunities in the rapidly growing field of collaboration technology.
What Are Exam Details?
The Cisco 350-801 exam has a duration of two hours during which the candidates will need to demonstrate that they have the necessary knowledge and skills to answer all questions correctly. The vendor doesn’t give details on the minimum passing score that the exam-takers should obtain or about the test structure. On the other hand, this is a clear sign that the exam is quite difficult and the candidates will need to be prepared to answer variously-formatted questions. When it comes to the prerequisites that the candidates need to follow for this exam, the vendor mentions that the candidates should know how to manage different terms related to computer networking. For example, they should have previously worked with WANs or LANs. Also, they should know how to manage digital interfaces at a basic level. Topics like Voice over IP or Public Switched Telephone Networks should be familiar for the candidates. Finally, the vendor requires the exam-takers to be aware of how to work with data networks or converged voice features in addition to deploying the Cisco Unified Communications Manager features.
Cisco 350-801 exam is a certification exam designed for professionals who want to demonstrate their knowledge and skills in implementing and operating Cisco Collaboration Core Technologies. 350-801 exam is a part of the CCNP Collaboration certification track and is intended for IT professionals who are involved in designing, deploying, and managing collaboration solutions.
NEW QUESTION # 221
Refer to the exhibit. An engineer deploys this Cisco Unified Border Element configuration, but the phone at extension 2221 fails to ring. These configurations were performed already in Cisco UCM:
- phone configuration and registration
- SIP trunk configuration
- translation pattern configuration
Which action resolves the issue?
- A. Change the destination pattern for dial-peer voice 10 to 2... $.
- B. Apply voice translation-rule 3 to dial-peer 11 voip.
- C. Replace voice translation-rule 3 with voice translation-rule 1.
- D. Apply voice translation-rule 3 to dial-peer 10 voip.
Answer: D
NEW QUESTION # 222
Refer to the exhibit. A collaboration engineer adds a redundant NTP server to an existing Cisco Collaboration solution.
On the Cisco UCM OS Administration page the new NTP server shows as "Not Accessible".
Which action resolves this issue?
- A. Restart NTPD on the Cisco UCM server
- B. Start the NTP service on the new NTP server
- C. Delete and re-add the new NTP server via the Cisco UCM command-line interface
- D. Configure the "reach" value as "377" for the new NTP server
Answer: C
NEW QUESTION # 223
What does average rate limiting allow?
- A. more traffic than the CIR to be sent when there is available bandwidth
- B. transmits traffic bursts up to the Bc size
- C. traffic to burst to the Be size when there is available bandwidth
- D. bandwidth up to the Be size
Answer: C
NEW QUESTION # 224
Refer to the exhibit.
AN engineer configures a VoIP dial peer on a Cisco gateway. which codec is used?
- A. G.711alaw
- B. G.711ulaw
- C. G.729r8
- D. No codec is used (missing codec command).
Answer: C
NEW QUESTION # 225
Refer to the exhibit. An engineer must configure DHCP service on the cisco service on the Cisco UCM. In which filed must the engineer configure the server IP to provide the configuration files to the endpoint?
- A. Primary TFTP Server IPv4 Address (Option 150)
- B. Primary Start IPv4 Address
- C. Primary Router IPv4 Address
- D. Bootstrap Server IPv4 Address
Answer: A
NEW QUESTION # 226
A present redundancy group is deployed, and an engineer with ID012345678 initiates a manual fallback. Which statement about Cisco Server Recovery Manager is true?
- A. disconnects all users that had been failed over
- B. disconnects all users that had been failed over, and the users must log in again.
- C. restarts critical on the secondary node
- D. restarts the Cisco Presence Engine
Answer: A
NEW QUESTION # 227
What is the major difference between the two possible Cisco lM and Presence high-availability modes?
- A. Balanced mode does not provide user load balancing, but it provides user failover in the event of an outage. Active/standby mode provides analways on standby node in the event of an outage, but it does not provide load balancing.
- B. Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standbynode in the event of an outage, and it also provides load balancing.
- C. Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standbynode in the event of an outage, but it does not provide load balancing.
- D. Balanced mode provides user load balancing and user failover only for manually generated failovers. Active/standby mode provides anunconfigured standby node in the event of an outage, but it does not provide load balancing.
Answer: C
Explanation:
Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.
Here is a more detailed explanation of the two modes:
Balanced mode: In balanced mode, the IM and Presence Service nodes are configured to work together to provide high availability. The nodes are configured in a redundancy group, and the system automatically balances the load of users across the nodes in the group. If one of the nodes fails, the system automatically fails over the users to the other nodes in the group.
Active/standby mode: In active/standby mode, one of the IM and Presence Service nodes is designated as the active node, and the other nodes are designated as standby nodes. The active node handles all of the user traffic, and the standby nodes are only used if the active node fails. If the active node fails, the system automatically fails over to one of the standby nodes.
NEW QUESTION # 228
Refer to the exhibit.
A Cisco UCM user with directory number 4401 dials 5507. and the call is routed to a Cisco Unified Border Element. Which IP address will the call be sent to?
- A. 10.0.0.2
- B. 10.0.0.1
- C. 10.0.0.3
- D. 10.0.0.4
Answer: A
NEW QUESTION # 229
An engineer configures Cisco Unified Communications Manager to prevent toll fraud. At which two points does the engineer block the pattern in Cisco Unified CM to complete this task? (Choose two.)
- A. route group
- B. CSS
- C. route pattern
- D. partition
- E. translation pattern
Answer: B,E
NEW QUESTION # 230
Which recommendation is the best practice for marking video and voice media in a Cisco Unified Communications network?
- A. Voice Cos 6 (IP Precedence 4, PHB AF41, or DSCP 24)
Video Cos 5 (IP Precedence 4, PHB EF, or DSCP 34) - B. Voice Cos 5 (IP Precedence 2, PHB EF, or DSCP 48)
Video Cos 4 (IP Precedence 4, PHB AF41, or DSCP 46) - C. Voice Cos 5 (IP Precedence 5, PHB EF, or DSCP 46)
Video Cos 4 (IP Precedence 4, PHB AF41, or DSCP 34) - D. Voice Cos 5 (IP Precedence 6, PHB AF41, or DSCP 16)
Video Cos 4 (IP Precedence 5, PHB EF, or DSCP 32)
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/netstruc.html
NEW QUESTION # 231
An administrator works with an ISDN PRI that is connected to a third-party PBX. The ISDN link does not come up; and the administrator finds that the third-party PBX uses the QSIG signalling method. Which command enables the Cisco IOS Gateway to use QSIG signalling on the ISDN link?
- A. isdn incoming-voice voice
- B. isdn switch-type basic-qsig
- C. isdn switch-type primary-qsig
- D. isdn switch-type basic-ni
Answer: B
NEW QUESTION # 232
Which protocol does prime collaboration Assurance use to poll the health status of different systems in the collaboration environment?
- A. SNMP
- B. SIP
- C. SCCP
- D. SMTP
Answer: A
NEW QUESTION # 233
Which configuration tells a switch port to send Cisco Discovery protocol packets that configure an attached Cisco IP phone to trust tagged traffic that is received from a device that is connected to the access port on the Cisco IP phone?
Router# configure terminal
- A. Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos extend trust - B. Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos trust extend cos 3
Router# configure terminal - C. Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos trust extend
Router# configure terminal - D. Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos trust extend cos 5
Router# configure terminal
Answer: C
NEW QUESTION # 234
What is the purpose of using an Expressway-C and Expressway-E pair in Cisco Collaboration Edge preferred architecture?
- A. to block access to ports 5060 and 5061
- B. to allow access on internal devices for management
- C. to provide internet connectivity via PSTN router
- D. to provide internet connectivity and firewall traversal for voice and video
Answer: D
NEW QUESTION # 235
Which configuration tells a switch port to send Cisco Discovery protocol packets that configure an attached Cisco IP phone to trust tagged traffic that is received from a device that is connected to the access port on the Cisco IP phone?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION # 236
Refer to the exhibit A user takes a phone from San Francisco to New York for a short reassignment. The phone was set up to use the San Francisco device pool, and device mobility is enabled on the Cisco UCM. The user makes a call that matches a route pattern in a route list that contains the Standard Local Route Group. To where does the call retreat?
- A. The call egresses in San Francisco because the user uses device mobility and is allowed to roam while still keeping the number and resources assigned in San Francisco
- B. The call fails because the Standard Local Route Group is being used only if no configuration is set for the device pools
- C. The call egresses in New York because the device automatically is assigned a New York device pool and uses the local gateway
- D. The call fails because device mobility is turned on. and the phone is not configured in New York The engineer must configure which sites the device should be roaming to
Answer: A
NEW QUESTION # 237
Multiple router patterns match a number. How does Cisco Unified Communications Manager determine which pattern to use?
- A. the one with the closed match
- B. the one with the longest match
- C. the one that discards everything PreDot
- D. the one that comes first in numerical order
Answer: A
NEW QUESTION # 238
Which DHCP option must be set up for new phones to obtain the TFTP server IP address?
- A. option 120
- B. option 15
- C. option 6
- D. option 66
Answer: D
Explanation:
Section: Infrastructure and Design
Explanation/Reference: https://blog.router-switch.com/2013/03/dhcp-option-150-dhcp-option-66/
NEW QUESTION # 239
......
350-801 dumps Free Test Engine Verified By It Certified Experts: https://www.braindumpquiz.com/350-801-exam-material.html
350-801 Exam Free Practice Test with100% Accurate Answers: https://drive.google.com/open?id=13GcVYCiibRGX3jwEy-cAs4tci0yttmhN