We're so confident of our products that we provide no hassle product exchange.
H3C GB0-381-ENU Exam Overview:
| Certification Vendor: | H3C |
|---|---|
| Exam Name: | H3C Large-Scale Routing Network Technologies V2.0 |
| Exam Number: | GB0-381-ENU |
| Exam Format: | Single Choice, True/False, Multiple Choice |
| Passing Score: | 600 / 1000 |
| Certificate Validity Period: | 3 years |
| Available Languages: | English |
| Real Exam Qty: | 50 |
| Exam Duration: | 60 minutes |
| Related Certifications: | H3C Certified Senior Engineer for Routing & Switching (H3CSE-Routing & Switching) |
| Exam Price: | 135 USD (approx, based on certification table) |
| Sample Questions: | H3C GB0-381-ENU Sample Questions |
| Exam Way: | Online proctored test organized via PROMETRIC. |
| Pre Condition: | Typically requires valid H3CNE certificate to pursue H3CSE-Routing & Switching. |
| Official Syllabus URL: | https://www.h3c.com/en/Training_Certification/Technical_training___certification/Certification_Project/H3CSE/ |
H3C GB0-381-ENU Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Topic 1: IPv6 Fundamentals | - IPv6 addressing and routing basics |
| Topic 2: Large-Scale Network Routing Overview | - Large-scale routing concepts - Network hierarchical and scalable routing models |
| Topic 3: Routing Protocol Basics | - IS-IS principles and configuration - BGP principles and configuration - OSPF principles and configuration |
| Topic 4: Route Control and Policy | - Route filtering and policy control - Route redistribution and import mechanisms |
H3C Large-Scale Routing Network Technologies V2.0 Sample Questions:
For the networking and applicable scenarios of IS-IS and OSPF, the correct one in the following description is ______.
- A. The IS-IS backbone area consists of all Level-2 and Level-1-2 systems. Because there is no virtual connection, it is required to be physically continuous.
- B. The protocol packets of IS-IS are in TLV format, which is easy to expand and support various network protocols, such as IPv6; while the protocol packets of OSPFv2 are based on IP, and the combination with IPv4 is too tight, so it is difficult to expand support IPv6
- C. Although both support large-scale hierarchical networks, OSPF is more widely used in enterprise-level networks
- D. The backbone area number of OSPF must be 0, and it must be continuous, and its continuity can be guaranteed through virtual links
LSAs of type ______ are definitely not injected into the OSPF TotallStub area.
- A. Tpe3
- B. Tpe4
- C. Tpe5
- D. Tpe7
The routing table on an H3C router is displayed as follows:
H3C]disp ip rout
Routing Table: public net
Destination/Mask Protocol Pre Cost Nexthop Interface
10.0.0.0/8 OSPF 10 2 20.1.1.2 Ethernet0/0
20.1.1.0/30 DIRECT 0 0 20.1.1.1 Ethernet0/0
20.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.0/8 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
172.16.1.0/24 DIRECT 0 0 172.16.1.1 LoopBack1
172.16.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
192.168.1.0/24 DIRECT 0 0 192.168.1. LoopBack2
192.168.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
At the same time, configure the following commands on the router:
bgp 65400
network 172.16.0.0
network 192.168.1.0
network 10.0.0.0
Based on the above information, which of the following BGP routes should exist in the router's BGP routing table:
- A. 172.16.1.0
- B. 10.0.0.0
- C. 20.1.1.0
- D. No BGP routes
- E. 192.168.1.0
In the IS-IS network as shown in the figure, the configuration of the authentication part of each router is as follows:
RTA-Serial2/0]isis authentication-mode md5 h3c
RTB-isis-1]area-authentication-mode md5 h3c
RTC-isis-1]domain-authentication-mode md5 h3c
Then on RTB, the state of RTA neighbor relationship is ______; while RTC______ RTB Level-1 LSP packets
- A. up ; reject
- B. down ; reject
- C. down ; accept
- D. up; accept
The network is shown in the figure, requiring RTA and RTB to establish OSPF neighbor relationship and exchange routes. To achieve the above purpose, please complete the configuration of RTA. RTA]ipv6
RTA]ospfv3
RTA-ospfv3-1]______________
RTA-ospfv3-1]interface e0/0
RTA-Ethernet0/0]ospfv3 1 area 0
RTA-Ethernet0/0]interface e0/1
RTA-Ethernet0/1]ospfv3 1 area 0
RTA-Ethernet0/1]interface e1/0
RTA-Ethernet1/0]ospfv3 1 area 0
- A. network::0
- B. area 0
- C. router-id 1.1.1.1
- D. import-route direct
By Camille
