Reliable NetApp NCSIE ONTAP NS0-183 Dumps PDF Feb 08, 2022 Recently Updated Questions
Pass Your Network Appliance NS0-183 Exam with Correct 61 Questions and Answers
NEW QUESTION 13
Click the Exhibit button.
You are installing a new FAS cluster. The management network must be on tagged VLAN 11 for remote administration by a service provider.
Referring to the exhibit, which two ports will allow service provider access to both cluster and node management LIFs? (Choose two.)
- A. e0M-11
- B. e0b-11
- C. e0a-11
- D. e0M
Answer: B,C
Explanation:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Systems/FAS_Systems/Can_the_SP_%2F%2F_BMC_and_e0M_interface_be_configured_on_different_subnets%3F
NEW QUESTION 14
A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data.
In this scenario, which two capabilities are available to the storage administrator? (Choose two.)
- A. the ability to create a 4-node MetroCluster across the four nodes
- B. the ability to move the volumes from the old nodes to the new nodes
- C. the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s
- D. the ability to convert the FAS2520s to disk shelves and attach them to the new nodes
Answer: A,D
NEW QUESTION 15
You installed a new pair of Cisco 92300YC cluster switches at a customer's site. Before you install any files on the switch, you want to view the current configuration.
In this scenario, which command would you use to accomplish this task?
- A. fabricshow
- B. show running-config
- C. switchcfgshow
- D. config show
Answer: C
NEW QUESTION 16
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp.
You use the autosupport history showcommand and see the output shown in the exhibit.
The customer confirms that the AutoSupport settings are correct.
Which two actions will solve this issue? (Choose two.)
- A. The customer needs to enable AutoSupport for both nodes.
- B. The customer needs to exclude the two nodes from the attachment-size limitation.
- C. The customer needs to change the transport protocol to HTTP.
- D. The customer needs to white-list the two nodes on their mail server.
Answer: A,D
NEW QUESTION 17
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
- A. intercluster LIF
- B. SVM management LIF
- C. node management LIF
- D. SVM data LIF
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 18
You create a new CIFS data LIF with the default failover group.
In this scenario, where will the new LIF failover if the node that owns the new LIF panics?
- A. to any port in the cluster that is operationally up
- B. to any available port in the same subnet
- C. to any available port listed in the broadcast domain
- D. to any port in the cluster that is administratively up
Answer: C
NEW QUESTION 19
You are deploying a cluster with four AFF A300 nodes and Cisco 3232C switches. When you arrive at the customer's site, you notice that there are multiple breakout cables and four Cisco 3232C switches. In this scenario, which statement is true?
- A. A 4-node AFF A300 cluster requires two Cisco 3232C switches for the cluster interconnect and two for management.
- B. A 4-node AFF A300 cluster requires four Cisco 3232C switches.
- C. Cisco best practices require four Cisco 3232C switches for high availability.
- D. Your customer ordered a MetroCluster IP configuration.
Answer: D
NEW QUESTION 20
Which statement about LIFs is true?
- A. One port can host multiple data LIFs.
- B. Cluster LIFs and data LIFs can share a port.
- C. One cluster-management LIF exists per node.
- D. A data LIF can be associated with multiple SVMs.
Answer: A
NEW QUESTION 21
A customer wants you to add a new AFF A700 HA pair to an existing 4-node AFF8080 EX cluster. The existing cluster uses NetApp CN1610 switches for the cluster connection and is using the recommended port count.
Which statement is true in this scenario?
- A. The AFF A700 is not supported with NetApp CN1610 switches/
- B. You cannot have more than four nodes with AFF.
- C. You cannot mix different AFF models in the same cluster.
- D. There are not enough ports available on the cluster switch.
Answer: C
NEW QUESTION 22
When planning the installation of a new ONTAP 9.5 cluster for a customer, which three steps should you perform? (Choose three.)
- A. Open a support case to prepare for the installation.
- B. Search for Technical Support bulletins for the hardware.
- C. Complete a Service Event Report.
- D. Review the hardware components in Hardware Universe.
- E. Use Config Builder to create a configuration spreadsheet.
Answer: C,D,E
NEW QUESTION 23
You are planning the deployment of a new 8-node ONTAP 9.5 cluster. To prepare for the installation, you want to create a custom configuration worksheet with all the information that the customer provided. You also want to use the worksheet to generate CLI commands for your installation.
In this scenario, which NetApp tool will help you achieve your goal?
- A. Fusion
- B. Config Validator
- C. ConfigBulider
- D. Config Advisor
Answer: C
NEW QUESTION 24
You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.
In this scenario, which two licenses are enabled on the cluster? (Choose two.)
- A. NVMe
- B. iSCSI
- C. CIFS
- D. FCP
Answer: C,D
NEW QUESTION 25
You are installing a new AFF A400 cluster for a customer. The customer indicates that they want to take advantage of AutoSupport On Demand.
In this scenario, which AutoSupport transport protocol must you use?
- A. FTP
- B. HTTP
- C. SMTP
- D. HTTPS
Answer: D
Explanation:
Explanation/Reference: https://www.netapp.com/media/10438-tr-4444.pdf (9)
NEW QUESTION 26
In an ONTAP switched cluster, which three types of traffic travels over the cluster network? (Choose three.)
- A. Epsilon voting
- B. remote cluster peering
- C. intracluster SnapMirror
- D. cluster database replication
- E. intercluster SnapMirror
Answer: A,C,D
NEW QUESTION 27
In an ONTAP 9.7 cluster, which LIF role is used for sending AutoSupport, establishing Network Time Protocol (NTP), and loading software updates?
- A. cluster management LIF
- B. cluster LIF
- C. node management LIF
- D. data LIF
Answer: C
Explanation:
Explanation/Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-nmg%2FGUID- DFFBE8D9-E824-4085-8FA2-24E367288CB8.html
NEW QUESTION 28
You are completing an ONTAP base installation, and your customer is asking you to create two SVMs, one for NFS and one for SMB.
Which type of SVM needs to be created to complete the installation?
- A. multitenancy node SVM
- B. system SVM
- C. data SVM
- D. admin SVM
Answer: C
NEW QUESTION 29
You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)
- A. SFP+ port
- B. SSH
- C. serial port
- D. rlogin
Answer: B,C
NEW QUESTION 30
Click the Exhibit button.
You are receiving AutoSupport e-mail from both controllers, but Active IQ is showing updates from only node cl-01-02.
Referring to the exhibit, what is a reason why Active IQ is receiving AutoSupport updates from only node cl-01-02?
- A. The mail host is blocking the AutoSupport.
- B. A firewall rule is blocking the AutoSupport.
- C. The service processor is not configured.
- D. The cluster management LIF is down.
Answer: B
NEW QUESTION 31
You are installing a new AFF A400 cluster for a customer. The customer indicates that they want to take advantage of AutoSupport On Demand.
In this scenario, which AutoSupport transport protocol must you use?
- A. FTP
- B. HTTP
- C. SMTP
- D. HTTPS
Answer: D
NEW QUESTION 32
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp.
You use the autosupport history showcommand and see the output shown in the exhibit.
The customer confirms that the AutoSupport settings are correct.
Which two actions will solve this issue? (Choose two.)
- A. The customer needs to enable AutoSupport for both nodes.
- B. The customer needs to exclude the two nodes from the attachment-size limitation.
- C. The customer needs to change the transport protocol to HTTP.
- D. The customer needs to white-list the two nodes on their mail server.
Answer: A,D
NEW QUESTION 33
What are two ways to identify an AFF All SAN Array system? (Choose two.)
- A. Use the cluster image show CLI command.
- B. View the ONTAP System Manager system nodes.
- C. Use the san config show CLI command.
- D. View the ONTAP System Manager cluster settings.
Answer: B,C
Explanation:
Explanation
Ways to identify an ASA system You can identify an ASA system using ONTAP System Manager or using the ONTAP command line interface (CLI). From the ONTAP System Manager dashboard, you can click on the system nodes. The personality type is displayed as "ASA" for ASA systems. From the CLI, you can use san config show command. The ASA value returns as true for ASA systems
NEW QUESTION 34
You are installing a 4-node AFF A400 cluster and are asked to create a custom security message before and after user login.
Which two security features are used to perform this task? (Choose two.)
- A. AutoSupport
- B. motd
- C. banner
- D. EMS
Answer: A,C
NEW QUESTION 35
......
Network Appliance NS0-183 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Latest 2022 Realistic Verified NS0-183 Dumps: https://www.braindumpquiz.com/NS0-183-exam-material.html