Use the best ways of preparing for HPE6-A73 Exam Dumps with BraindumpQuiz HP HPE6-A73 dump PDF [2021]
HP HPE6-A73 exam candidates will surely pass the Exam if they consider the HPE6-A73 dumps learning material presented by BraindumpQuiz.
NEW QUESTION 42
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Area 1 has 23 routes
- C. Area 0 has 13 routes
- D. Core1 has received one LSA Type 5 from the ASBR
Answer: B
NEW QUESTION 43
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Client 3 to Client 2
- B. Client 1 to Client 2
- C. Server 1 to Client 1
- D. Server 2 to Client 2
- E. Client 1 to Client 3
Answer: B,E
NEW QUESTION 44
A network administrator is implementing OSPF, where there are two exit points. Each exit point has a stateful, application inspection firewall to implement company policies.
What would the best practice be to ensure that one firewall will see both directions of the traffic, preventing asynchronous connections in the network?
- A. Both ASBRs should define External Type 2 routes for the
- B. Both ASBRs should define External Type 1 routes for the
- C. Both ASBRs should define External Type 2 routes for the
- D. Both ASBRs should define External Type 1 routes for the
Answer: B
NEW QUESTION 45
Examine the network topology.
Company XYZ has two connections to a service provider (ISP1). Here is the configuration of Router1:
Here is the configuration of Router2:
Based on configuration of Router1 and Router2, which BGP metric is being manipulated?
- A. Local preference
- B. Weight
- C. Multiple exit discriminator
- D. AS path length
Answer: C
NEW QUESTION 46
Examine the network exhibit.
A company has a guest implementation for wireless and wired access Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic.
The network administrator has established a GRE tunnel between AOS-CX switcheswhere guests are connected to arouting switch in the DMZ Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. Classifier policies
- B. User-based tunneling (UBT)
- C. Policy-based routing (PBR)
- D. OSPF route maps using the "set metric" command
Answer: C
NEW QUESTION 47
A network engineer for a company with 896 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 1 second
- B. Once every 30 seconds
- C. Once every 5 seconds
- D. Once every 60 seconds
Answer: D
NEW QUESTION 48
Which statement is correct regarding ACLs and TCAM usage?
- A. Applying an ACL to a group of ports consumes the same resources as specific ACE entries
- B. Applying an ACL to a group of VLANs consumes the same resources as specific ACE entries
- C. Using object groups consumes the same resources as specific ACE entries.
- D. Compression is automatically enabled for ASIC TCAMs on AOS-CX switches.
Answer: A
NEW QUESTION 49
A network engineer is using NetEdit to manage AOS-CX switches. The engineer notices that a lot of thirdparty VoIP phones are showing up in the NetEdit topology. The engineer deletes these, but they are automatically rediscovered by NetEdit and added back in.
What should the administrator do to solve this problem?
- A. Disable the RESTful API on all the VoIP phones
- B. Change the VoIP phone SNMP community string to something unknown by NetEdit
- C. Disable SSH access on all the VoIP phones
- D. Disable LLDP globally on the AOS-CX switches where phones are connected
Answer: B
NEW QUESTION 50
Examine the attached diagram.
The two PCs are located in VLAN 11 (10.1.11.0/24). Which example defines how to implement active gateway on the VSX core for VLAN 11?
- A. interface vlan 11
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00 - B. interface lag 254
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00 - C. interface lag 254
active-gateway vlan 11 ip 10.1.11.1
active-gateway vlan 11 mac 02:02:00:00:01:00 - D. vsx
vrrp group 1
Answer: A
NEW QUESTION 51
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Area 1 has 23 routes
- C. Area 0 has 13 routes
- D. Core1 has received one LSA Type 5 from the ASBR
Answer: B
NEW QUESTION 52
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of
"Unknown".
What is the cause of this issue?
- A. A connectivity issue exists between NAE and the AOS-CX switch
- B. The administrator does not have the appropriate credentials to interact with NAE
- C. The RESTful API has not been enabled on the AOS-CX switch
- D. The number of scripts or agents has exceeded the hardware's capabilities
Answer: A
Explanation:
Explanation
NEW QUESTION 53
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
- B. access-list ip server 10 permit tcp any group web-servers group web-ports
- C. access-list ip server 10 permit tcp any web-servers web-ports
- D. access-list ip server 10 permit tcp any web-servers group web-ports
Answer: C
NEW QUESTION 54
A network administrator is managing a network that deploys a multicast service. The administrator has multiple streams successfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination address of 239.0.0.1. However, clients who have not joined the stream are receiving it.
What should the administrator do to fix this problem?
- A. Define the 239.0.0.1 stream on the rendezvous point (RP)
- B. Verify that IGMP is enabled between the switches connecting the multicast source and receivers
- C. Define the 239.0.0.1 stream on the PIM candidate bootstrap router
- D. Change the destination multicast address to 239.1.1.1
Answer: A
NEW QUESTION 55
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. Classifier policies
- B. Policy-based routing (PBR)
- C. OSPF route maps using the "set metric" command
- D. User-based tunneling (UBT)
Answer: D
NEW QUESTION 56
A network administrator is implementing a configuration plan in NetEdit The administrator used NetEdit to push the configuration plan to the switch. Which option in the NetEdit planning section should the administrator select to save the configuration running on the switch to the startup-config?
- A. EDIT
- B. COMMIT
- C. VALIDATE
- D. DEPLOY
Answer: B
NEW QUESTION 57
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. Classifier policies
- B. Policy-based routing (PBR)
- C. OSPF route maps using the "set metric" command
- D. User-based tunneling (UBT)
Answer: D
NEW QUESTION 58
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?
- A. Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- B. Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
- C. Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- D. Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
Answer: D
NEW QUESTION 59
A network engineer is having a problem adding a custom-written script to an AOS-CX switch's NAE GUI.
The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:
What should the engineer perform to fix this issue?
- A. Install the script's signature before installing the new script
- B. Ensure the engineer's desktop and the AOS-CX switch are synchronized to the same NTP server
- C. Enable trust settings for the AOS-CX switch's SSL certificate
- D. Remove a script that is no longer used before installing the new script
Answer: D
NEW QUESTION 60
......
Full HPE6-A73 Practice Test and 102 unique questions with explanations waiting just for you, get it now: https://drive.google.com/open?id=1dHiq8E3KBgbjg9qYTrARY8bfjakXmkF4
Accurate & Verified Answers As Seen in the Real Exam here: https://www.braindumpquiz.com/HPE6-A73-exam-material.html