100% Free NSE7_OTS-7.2 Exam Dumps Use Real NSE 7 Network Security Architect Dumps With 74 Questions!
Pass Your NSE7_OTS-7.2 Exam Easily With 100% Exam Passing Guarantee [2024]
Fortinet NSE7_OTS-7.2 Exam is ideal for professionals who are responsible for designing, configuring, and maintaining secure OT networks. It is also suitable for individuals who work in IT security and want to expand their knowledge and skills in the field of OT security. Fortinet NSE 7 - OT Security 7.2 certification program offers a comprehensive curriculum that covers the latest trends and best practices in OT security. NSE7_OTS-7.2 exam is designed to test the candidate's understanding of the concepts and principles of OT security, as well as their ability to apply this knowledge to real-world scenarios. By passing the Fortinet NSE7_OTS-7.2 Exam, candidates can demonstrate that they have the expertise and skills needed to secure OT networks and protect critical infrastructure from cyber threats.
The Fortinet NSE7_OTS-7.2 exam focuses on a range of topics such as OT network and device security, secure network design, policy management, incident response, and risk management. Candidates will need to demonstrate a comprehensive understanding of these topics in order to pass the exam and become certified. NSE7_OTS-7.2 exam is designed to be challenging to ensure that only the most skilled and knowledgeable professionals are awarded certification.
Passing the Fortinet NSE7_OTS-7.2 exam validates that an individual has the knowledge and skills required to secure OT networks against cyber threats. Fortinet NSE 7 - OT Security 7.2 certification is particularly relevant in industries such as energy, oil and gas, transportation, and manufacturing, where OT networks are widely used. Fortinet NSE 7 - OT Security 7.2 certification also demonstrates that an individual can implement best practices for securing OT networks, such as network segmentation, access control, and threat detection and response.
NEW QUESTION # 38
Which two statements about the Modbus protocol are true? (Choose two.)
- A. Modbus uses UDP frames to transport MBAP and function codes.
- B. You can implement Modbus networking settings on internetworking devices.
- C. Modbus is used to establish communication between intelligent devices.
- D. Most of the PLC brands come with a built-in Modbus module.
Answer: B,D
NEW QUESTION # 39
Refer to the exhibits.
Which statement is true about the traffic passing through to PLC-2?
- A. IPS must be enabled to inspect application signatures.
- B. IEC 104 signatures are all allowed except the C.BO.NA 1 signature.
- C. SSL Inspection must be set to deep-inspection to correctly apply application control.
- D. The application filter overrides the default action of some IEC 104 signatures.
Answer: D
NEW QUESTION # 40
Refer to the exhibit. You are assigned to implement a remote authentication server in the OT network. Which part of the hierarchy should the authentication server be part of?
- A. Cloud
- B. Edge
- C. Access
- D. Core
Answer: B
NEW QUESTION # 41
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic? (Choose three.)
- A. Source defined as internet services in the firewall policy
- B. Destination defined as internet services in the firewall policy
- C. Lowest to highest policy ID number
- D. Services defined in the firewall policy.
- E. Highest to lowest priority defined in the firewall policy
Answer: B,D,E
Explanation:
The three criteria that a FortiGate device can use to look for a matching firewall policy to process traffic are:
A) Services defined in the firewall policy - FortiGate devices can match firewall policies based on the services defined in the policy, such as HTTP, FTP, or DNS.
D) Destination defined as internet services in the firewall policy - FortiGate devices can also match firewall policies based on the destination of the traffic, including destination IP address, interface, or internet services.
E) Highest to lowest priority defined in the firewall policy - FortiGate devices can prioritize firewall policies based on the priority defined in the policy. The device will process traffic against the policy with the highest priority first and move down the list until it finds a matching policy.
NEW QUESTION # 42
Refer to the exhibit. You are navigating through FortiSIEM in an OT network. How do you view information presented in the exhibit and what does the FortiGate device security status tell you?
- A. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
- B. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
- C. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
- D. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.
Answer: D
NEW QUESTION # 43
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic?
(Choose three.)
- A. Source defined as internet services in the firewall policy
- B. Destination defined as internet services in the firewall policy
- C. Lowest to highest policy ID number
- D. Services defined in the firewall policy.
- E. Highest to lowest priority defined in the firewall policy
Answer: B,D,E
Explanation:
Explanation
The three criteria that a FortiGate device can use to look for a matching firewall policy to process traffic are:
A: Services defined in the firewall policy - FortiGate devices can match firewall policies based on the services defined in the policy, such as HTTP, FTP, or DNS.
D: Destination defined as internet services in the firewall policy - FortiGate devices can also match firewall policies based on the destination of the traffic, including destination IP address, interface, or internet services.
E: Highest to lowest priority defined in the firewall policy - FortiGate devices can prioritize firewall policies based on the priority defined in the policy. The device will process traffic against the policy with the highest priority first and move down the list until it finds a matching policy.
NEW QUESTION # 44
When device profiling rules are enabled, which devices connected on the network are evaluated by the device profiling rules?
- A. Rogue devices, each time they connect
- B. Rogue devices, only when they connect for the first time
- C. All connected devices, each time they connect
- D. Known trusted devices, each time they change location
Answer: B
NEW QUESTION # 45
Refer to the exhibit
In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?
- A. PLCs use IEEE802.1Q protocol to communicate each other.
- B. This integration solution expands VLAN capabilities from Layer 2 to Layer 3.
- C. There is no micro-segmentation in this topology.
- D. An administrator can create firewall policies in the switch to secure between PLCs.
Answer: C
NEW QUESTION # 46
A FortiGate device is newly deployed as the edge gateway of an OT network security fabric. The downstream FortiGate devices are also newly deployed as Security Fabric leafs to protect the control area zone.
With no additional essential networking devices, and to implement micro-segmentation on this OT network, what configuration must the OT network architect apply to control intra-VLAN traffic?
- A. Create a software switch on each downstream FortiGate device.
- B. Set up VPN tunnels between downstream and edge FortiGate devices.
- C. Enable transparent mode on the edge FortiGate device.
- D. Enable security profiles on all interfaces connected in the control area zone.
Answer: B
NEW QUESTION # 47
What is the main difference between real-time logs and historical logs on FortiAnalyzer?
- A. Historical logs are indexed in the SQL database, but real-time logs are not.
- B. Real-time logs are indexed while historical logs are compressed in the SQL database.
- C. Historical logs are compressed and real-time logs are indexed in the SQL database.
- D. Real-time logs are indexed in the SQL database, but historical logs are not.
Answer: A
NEW QUESTION # 48
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiEDR
- B. FortiNAC
- C. FortiSwitch
- D. FortiGate
Answer: D
Explanation:
Explanation
An OT network architect can accomplish the goal of securing control area zones with a single network access policy to provision devices to any number of different networks on a FortiGate device.
NEW QUESTION # 49
Refer to the exhibit and analyze the output.
Which statement about the output is true?
- A. This is a sample of a PAM event type.
- B. This is a sample of an SNMP temperature control event log.
- C. This is a sample of FortiGate interface statistics.
- D. This is a sample of a FortiAnalyzer system interface event log.
Answer: A
NEW QUESTION # 50
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?
- A. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
- B. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
- C. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
- D. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.
Answer: B
Explanation:
Explanation
This way, FortiSIEM can discover and monitor everything attached to the remote network and provide security visibility to the corporate network
NEW QUESTION # 51
FortiAnalyzer is implemented in the OT network to receive logs from responsible FortiGate devices. The logs must be processed by FortiAnalyzer.
In this scenario, which statement is correct about the purpose of FortiAnalyzer receiving and processing multiple log messages from a given PLC or RTU?
- A. To determine which type of messages from the PLC or RTU causes issues in the plant
- B. To isolate PLCs or RTUs in the event of external attacks
- C. To configure event handlers and take further action on FortiGate
- D. To help OT administrators configure the network and prevent breaches
Answer: C
NEW QUESTION # 52
An OT network administrator is trying to implement active authentication.
Which two methods should the administrator use to achieve this? (Choose two.)
- A. Two-factor authentication on FortiAuthenticator
- B. Role-based authentication on FortiNAC
- C. Local authentication on FortiGate
- D. FSSO authentication on FortiGate
Answer: A,C
NEW QUESTION # 53
Which deployment option allows an administrator to detect intrusions without any modifications to production traffic?
- A. Inline IPS and IDS
- B. Offline IDS
- C. Offline IPS
- D. Virtual patching
Answer: B
NEW QUESTION # 54
Which two frameworks are common to secure ICS industrial processes, including SCADA and DCS? (Choose two.)
- A. NIST Cybersecurity
- B. Modbus
- C. IEC 62443
- D. IEC104
Answer: C,D
NEW QUESTION # 55
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for device profiling.
- B. It can be used for industrial intrusion detection and prevention.
- C. It can be used for IoT device detection.
- D. It can be used for network micro-segmentation.
Answer: A,C
Explanation:
Explanation
Typically, in a microsegmented network, NGFWs are used in conjunction with VLANs to implement security policies and to inspect and filter network communications. Fortinet FortiSwitch and FortiGate NGFW offer an integrated approach to microsegmentation.
NEW QUESTION # 56
An OT architect has deployed a Layer 2 switch in the OT network at Level 1 the Purdue model- process control. The purpose of the Layer 2 switch is to segment traffic between PLC1 and PLC2 with two VLANs. All the traffic between PLC1 and PLC2 must first flow through the Layer 2 switch and then through the FortiGate device in the Level 2 supervisory control network. What statement about the traffic between PLC1 and PLC2 is true?
- A. The Layer 2 switches routes any traffic to the FortiGate device through an Ethernet link.
- B. The Layer 2 switch rewrites VLAN tags before sending traffic to the FortiGate device.
- C. PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
- D. In order to communicate, PLC1 must be in the same VLAN as PLC2.
Answer: C
Explanation:
The statement that is true about the traffic between PLC1 and PLC2 is that PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
NEW QUESTION # 57
What triggers Layer 2 polling of infrastructure devices connected in the network?
- A. A matched security policy
- B. A matched profiling rule
- C. A linkup or linkdown trap
- D. A failed Layer 3 poll
Answer: C
NEW QUESTION # 58
......
Study resources for the Valid NSE7_OTS-7.2 Braindumps: https://www.braindumpquiz.com/NSE7_OTS-7.2-exam-material.html
NSE7_OTS-7.2 Dumps are Available for Instant Access: https://drive.google.com/open?id=1kTcPEXxpMmqD8xFLoJMK8OAAos6M8brD