Oct-2022 EADP19-001 Study Material, Preparation Guide and PDF Download
Free EADP19-001 Certification Sample Questions with Online Practice Test
NEW QUESTION 27
An ArcGIS user plans to distribute a series of map documents where the amount of time the map file can be viewed is limited. Which format should the user create to specify a timeout period for these maps?
- A. msd
- B. pmf
- C. mpk
- D. ipk
Answer: A
NEW QUESTION 28
The ArcGlS user is given data for the Arctic and is asked to perform various types of analysis using the data.
The data extend from the North pole south to 70 degrees North Latitude Data layers may contain points, lines, or polygons, and Include ice surveys from NOAA depth contours continental margins, locations of Known and suspected oil reserves, endangered species habitat and territorial boundaries for nations having Arctic coastline.
Given known petroleum reserves in the Arctic, plus areas reserved for endangered species habitat the user must determine the area In square miles that is available for oil extraction development for the United States.
Which protection is best suited for this analysis?
- A. double stereographic
- B. Albers equal area conic
- C. Lambert conformal conic
- D. Lambert azimuthal equal area
Answer: D
NEW QUESTION 29
An ArcGIS user is making a map and needs to symbolize cliff and escarpment features above contour features.
How can the features be ordered correctly if they are all in the same layer?
- A. set a definition query
- B. reorder the symbols in the symbology properties
- C. use scale-dependent drawing
- D. use symbol level drawing
Answer: D
NEW QUESTION 30
An ArcGis user is making a small-scale map using road data that was collected at a large scale. What is the appropriate tool for removing some of the road detail?
- A. Collapse Dual Lines to Centerline
- B. Smooth Line
- C. Thin Road Network
- D. Simplify Line
Answer: D
NEW QUESTION 31
What is the most efficient way for an ArcGlS user to modify the projection for data in a non- standard coordinate system (undefined in ArcGlS) to align with data in a standard coordinate system?
- A. select a different datum
- B. modify central meridian
- C. modify false easting and false northing
- D. modify standard parallel 1 and standard parallel 2
Answer: C
NEW QUESTION 32
Using the Spatial Analyst IDW (Inverse Distance Weighted) tool an ArcGlS user interpolates a point feature class to a raster. The user notices that some high point values near the edge of the feature class seem to have a dramatic effect on the output.
This occurs even in areas that are far from the high edge values
Which two parameters should the user consider changing in the IDW tool? (Choose two)
- A. z-value field
- B. output cell size
- C. search radius
- D. weight
- E. power
Answer: B,D
NEW QUESTION 33
A raster dataset called rasterl.tif contains many pixels with values of NoData.
Which map algebra expression changes NoData values to 0 (zero) in the output raster dataset while leaving all other pixel values the same?
- A. con(rasten.tif = NoData. 0 raster!, tif)
- B. con(rasten.tif = = NoData, 0, rasterl.tif)
- C. con(isnull(raster1.tif). 0, rasterl.tif)
- D. con(setnull{raster1.tif), 0, rasterl.tif)
Answer: B
NEW QUESTION 34
An ArcGIS user is tasked with converting an IDRISI vector format file to a geodatabase feature class. The user does not need to change any aspects of the data source in the output feature class.
Which tool should the user employ?
- A. Raster to Geodatabase
- B. Quick Import
- C. Feature Class to Feature Class
- D. IDRISI to Feature Class
Answer: A
NEW QUESTION 35
An ArcGIS user has a point feature class, and needs to determine an area of Influence for each point. Which tool should be used to perform this analysis?
- A. Voronoi Map
- B. Shortest Path
- C. General QQ Plot
- D. Neighborhood Statistics
Answer: A
NEW QUESTION 36
An ArcGIS user finds consistently returned low matches tor addresses which refer to "River" abbreviated as
"RVER". In order to improve their matches the "RVER" abbreviation needs to be added to the xml file in the geocoding rule base.
Which two tools can be used to ensure these changes will be reflected before performing a new geocode?
{Choose two)
- A. Rebuild Address Locator tool
- B. Rematch Addresses tool
- C. Geocode Addresses tool
- D. Create Address Locator tool
- E. Standardize Addresses tool
Answer: D,E
NEW QUESTION 37
An ArcGIS user wants to symbolize the intersections of highways and streets so that the road casing symbols can be blended together to represent connectivity, but not blended in other situations to represent disconnectivity (e.g. where a highway passes under a surface street) What should be used to ensure that the road casings connect correctly?
- A. single layered symbol with two offset lines
- B. multi-layered symbol with one layer wider than the other
- C. symbol-level drawing with the merge option
- D. symbol-level drawing with the join option
Answer: D
NEW QUESTION 38
A taster contains pixels with decimal values.
Which method is used to round raster pixel values to the nearest whole number?
- A. use the Plus tool (Spatial Analyst) to add 0.5, then the int tool (Spatial Analyst) to truncate to the nearest integer
- B. use the Round Down tool (Spatial Analyst), then the Round Up tool (Spatial Analyst)
- C. use the Round Up tool (Spatial Analyst), then the Round Down tool (Spatial Analyst)
- D. use the Plus tool (Spatial Analyst) to add 1. then the Minus tool (Spatial Analyst) to subtract 0.5
Answer: B
NEW QUESTION 39
An ArcGlS user receives parcel data from the regional government, which is supposed to line up with parcels in the data maintained by the local government. The user is tasked with reconciling the discrepancies between the local and regional data.
In which situation are the parcel boundaries within the local data more likely to be accurate than the regional data?
- A. when local records show a parcel subdivided in 2007 but regional records do not include the update
- B. when a privately owned parcel is donated to the local government in 2002 for a park but the regional government does not have a record of the new owner
- C. when regional records show a new survey of a parcel in 1996. but local records do not include the survey information
- D. when a new subdivision surveyed in 2004 within the regional area is incorporated into the local area limits in 2007
Answer: A
NEW QUESTION 40
Using street data for a large metropolitan area, which analysis method shows the nearest hospital to a traffic accident?
- A. route
- B. closest facility
- C. find nearest
- D. least-cost path
Answer: B
NEW QUESTION 41
An ArcGIS user is given a geodatabase and tasked with adding a feature class to an existing geodatabase topology. What should the user do?
- A. remove all the feature classes from existing topology and add everything back including the feature class that needs to be added
- B. export the existing geodatabase topology to an XML file include the feature class in the XML and import it
- C. modify the existing geodatabase topology to include the feature class Explanation:-https://desktop.arcgisxom/en/arcmap/10.3/tools/data-m
- D. delete the existing geodatabase topology and create a new one to include the feature class
Answer: C
NEW QUESTION 42
Refer to the exhibit.
The ArcGIS user is given data for the Arctic, and is asked to perform various types of analysis using the data.
The data extends from the North Pole south to 55 degrees North Latitude Data layers may contain points lines, or polygons and include ice surveys from NOAA depth contours; continental margins, locations of known and suspected oil reserves, endangered species habitat and territorial boundaries for nations having Arctic coastline.
An ArcGIS user is asked to calculate the distance a cruise ship will travel through open water, departing from Nome, Alaska, with stops at Point Barrow Alaska Churchill Manitoba St John's Newfoundland and ending in Bar Harbor Maine. On the basis of these calculations the cruise ship line will determine fuel requirements and travel time.
Which map projection yields the most accurate results for this distance calculation?
- A. Mercator
- B. azimuthal equidistant
- C. Albers equal area conic
- D. Lambert azimuthal
Answer: D
NEW QUESTION 43
......
What is the worth of the Esri EADP19-001 Certification
Esri EADP19-001 ArcGIS Desktop Professional Certification Exam is the only way to go beyond just passing your Esri EADP19-001 ArcGIS Desktop Professional Certification Exam. You will be able to get the desired results in the Esri EADP19-001 ArcGIS Desktop Professional Certification Exam by using these tools which are designed and created for the Esri certification courses.
The Esri EADP19-001 ArcGIS Desktop Professional Certification Exam has been designed and created with great attention to the needs of the candidates of Esri certification exams. They have worked very hard in order to make sure that everything is going well for you. They did not leave any stone unturned in order to make sure that you will be able to pass your Esri EADP19-001 ArcGIS Desktop Professional Certification Exam on the first attempt with good grades. Esri EADP19-001 exam dumps will upgrade your skills.
The Esri EADP19-001 ArcGIS Desktop Professional Certification Exam practice questions and answers also come with a 100% money-back guarantee if you do not pass your exam on the first attempt. You can also apply for a refund if you feel like it is not working out for you and if you are not satisfied with their.
Click on the link below for getting more info about the Esri EADP19-001 Exam:
Official link to the Esri EADP19-001 Exam
EADP19-001 Certification Study Guide Pass EADP19-001 Fast: https://www.braindumpquiz.com/EADP19-001-exam-material.html
EADP19-001 Dumps PDF 2022 Program Your Preparation EXAM SUCCESS: https://drive.google.com/open?id=1yR8xCxfElwMSRt3_7UnNvIiZSlekjpCk