[Nov 09, 2024] HPE7-A03 Dumps Full Questions - Exam Study Guide
Aruba Certified Professional Free Certification Exam Material from BraindumpQuiz with 70 Questions
NEW QUESTION # 29
What documents should be included in the solution proposal? (Place the correct items into the list at the right.
Order is not important. Not all options will be used)
Answer:
Explanation:
Explanation:
For the solution proposal, the documents that should typically be included are:
* Architect's notes from meetings
* As-built rack drawings
* Assumptions documented in design
* Bill of materials
* Data sheets of equipment proposed
* Proposed topology diagram
* Quote
NEW QUESTION # 30
What possible issue with the cote switch selection do you see in regards to the customers' requirements?
- A. The cote switch will have a lot of unused ports.
- B. The core switch will not support the 25GbE downlinks to the distribution switches.
- C. The cote switch will not support the 10GbE downlinks to the cabins and technical rooms.
- D. The cote switch will not have enough ports for VSX links.
Answer: B
Explanation:
In the scenario described, the most significant issue with the core switch selection, according to Aruba Campus Access learning resources, is answer A: "The core switch will not support the 25GbE downlinks to the distribution switches." This is a critical consideration because the bandwidth capabilities between the core and distribution layers significantly impact the overall network performance and scalability. If the core switch cannot support 25GbE downlinks, it may create a bottleneck, preventing the distribution switches from operating at their full capacity and affecting the performance of connected devices and applications. Ensuring the core switch has the necessary port speeds and densities to support the intended design and traffic patterns is crucial in network design, as emphasized in Aruba's documentation on campus network architectures.
NEW QUESTION # 31
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
Based on the scenario, where would you look to add additional items to the BOM to aid the company goals'(Select three.)
- A. Building Facilities
- B. Sales Management
- C. Finance Team
- D. Security Team/CISO
- E. Marketing
- F. Customer Experience Officer
Answer: A,C,E
Explanation:
In addressing the company's goals and the challenges presented in the scenario, adding items to the Bill of Materials (BOM) that would involve the Building Facilities team could include infrastructure upgrades like improved cabling (moving from Cat5 to a higher category) or enhancements to support the new wireless and VoIP systems. For the Marketing team, technologies that could enable better interaction with customers, such as location-based services or analytics tools, would be beneficial. These could help in understanding customer behavior within the stores and tailoring marketing efforts accordingly. Finally, input from the Finance Team would be essential in ensuring that the solutions chosen fit within the budget constraints and offer a good return on investment, especially considering the company's desire for a solution that could last 7+ years and support their growth plans.
NEW QUESTION # 32
Which platform can be used to demo your solution to a customer? (Select three.)
- A. your own lab
- B. Aruba CX Switch Simulator
- C. Aruba Support Portal
- D. Aruba Innovation Zone
- E. Aruba Solution Exchange
- F. Aruba DemoExperiencePlatform
Answer: B,D,F
Explanation:
To demonstrate a solution to a customer, three platforms that can be effectively used are the Aruba CX Switch Simulator (Option B), Aruba Innovation Zone (Option C), and Aruba Demo Experience Platform (Option F).
The Aruba CX Switch Simulator provides a virtual environment where customers can interact with the Aruba OS-CX interface, allowing them to explore features and configurations without the need for physical hardware. The Aruba Innovation Zone offers a space for experiencing the latest Aruba technologies and solutions in action, showcasing their capabilities in real-world scenarios. The Aruba Demo Experience Platform is designed to give customers a comprehensive look at Aruba's solutions, enabling interactive demos and simulations that highlight the benefits and functionalities of the products. These platforms provide valuable resources for customers to understand and evaluate Aruba solutions in a controlled and informative environment.
NEW QUESTION # 33
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would like 10 include Blue Dot location tracking in their four floors of corporate space. The APs are not Ideally placed to allow for smooth map transitions.
What could you add lo provide better tracking? (Select two.)
- A. tags
- B. more APs
- C. UXI sensors
- D. beacons
Answer: B,D
Explanation:
For improving Blue Dot location tracking in corporate spaces where access points (APs) are not ideally placed for smooth map transitions, adding more APs and deploying beacons are effective strategies. More APs can enhance the density and coverage of the Wi-Fi network, providing more data points for more accurate location tracking. Beacons, specifically designed for precise indoor positioning, can supplement Wi-Fi-based location services by broadcasting signals that mobile devices can use to determine their location with greater accuracy.
This combination ensures better tracking and smoother map transitions within the corporate space, enhancing the overall effectiveness of the Blue Dot location tracking solution.
NEW QUESTION # 34
XYZ Regional Hospital is an integrated healthcare system of Hospitals, neighborhood health centers, and small doctor offices. XYZ Regional Hospital has recently merged with 1x neighborhood health centers and
1Z5 doctor branch offices. The wireless, wired access, and AAA solutions are outdated and need to be replaced.
XYZ Regional Hospital is looking to future-proof and improve efficiency across all sites by enhancing wired and wireless access and migrating to a centralized and unified wired/wireless and policy management that can provide uninterrupted availability of all systems.
Locations:
- XYZ Regional Hospital Is located In New York City
- Dila Health Center Is located in City A
- Mount Health Center is located In City B
- Rock Health Center is located in City C
- Branch clinics are located at different locations across the United States Requirements:
- Provide, via management software, one single pane of glass to manage wired and wireless LANs, and VPNs across campus, branch, and remote via web/cloud architecture providing near real-time insight, troubleshooting tools, and service Level performance reporting.
- Seamless integration across wired, wireless. WAN, S0-8ranch. loT
* Provide secure wireless access to all the employees of (he Regional Hospital and partners, as well as provide wireless Internet access to medical citizens when they visit our facilities.
- All-access points must support the following features and specifications: 802.1 lax (WI-FI 6E Certified)
- Security options Including WPZ/WPA3. 80Z.1 X with Radius secure authentication
- Identify and authenticate every wireless and wired device
- End-to-end role-based security
- Seamless mobility across the hospital tor medical teams, patients, and visitors
- Cuts Wi-Fi deployment times from days to hours and enables Zero-Touch deployments across the site
- Establishes a resilient, future-ready network infrastructure with the intelligence, scalability, and intuitive toolsets to meet emerging needs
- Fully redundant branch solution with dynamic path selection to the hospital XYZ Regional Hospital is looking tor an NAC solution to address its security challenges-Requirements:
- fully redundant NAC solution for management and authentication
- wireless and wired authentication for the main hospital will be handled locally The IT director of XYZ Regional Hospital is interested in a solution tor nurse workstation tracking. What solution would meet the customer's requirements? (Select three.)
- A. Aruba Tags Configuration App
- B. Asset Tracking Subscription
- C. Airwave
- D. Aruba User Experience Insight
- E. Map Subscription
- F. Client insight
Answer: B,D,E
Explanation:
For nurse workstation tracking, Aruba User Experience Insight can provide insights into how applications and network services are performing, which can help in understanding user experiences across the hospital network. The Asset Tracking Subscription is a crucial component for keeping track of physical assets such as nurse workstations. The Map Subscription would complement the asset tracking by providing detailed maps of the hospital's interior, enabling precise location tracking of the workstations. These solutions together would allow the hospital to effectively track and manage their resources, ensuring that nurses can find workstations quickly and efficiently, which is essential in a fast-paced medical environment.
NEW QUESTION # 35
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
Which two projects does the customer have in the planning state? (Select two)
- A. VoIP upgrade
- B. Inventory Control System
- C. new POS system
- D. kiosks/display station
Answer: A,B
Explanation:
ACME Retail is in the planning stages of upgrading their current PBX system to a VoIP system, as indicated by their intention to move away from the existing PBX system later in the year. This upgrade is part of their overall network infrastructure overhaul to incorporate modern bestpractices. Additionally, the company is facing challenges with their current inventory control system, particularly with Zebra barcode scanners having signal issues throughout the stores, making monthly inventory processes difficult. Improving the inventory control system to achieve almost real-time inventory for their online service is a critical aspect of their growth and cost-cutting strategy, hence it's in the planning stage as well.
NEW QUESTION # 36
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would take to ensure redundant RADIUS resources in each of their three geographical regions (AMER. EMEA. and APAC) A large office location Is available In each region with sufficient VMware resources available.
- Each region has 5.000 clients, all of which will need to do either 802.1 x wired or wireless authentications as well as 802.1 x authentication for a single personal device on Wi-Fi.
* All of the non-personal devices will also need to validate health with a local agent.
* A total of 500 guests are expected to be connected on average with a maximum of 700 simultaneous connections making use of Guest Portal for access to the Internet.
* TACACS authentication will also be configured for a total of 1,200 evenly dispersed NADs.
In order to support virtual IPs and server redundancy in each region how many Virtual Policy Manager Licenses will be needed?
- A. six licenses. C3000V
- B. three licenses. C2000V
- C. three licenses. C3000V
- D. six licenses. C2000V
Answer: A
Explanation:
In a scenario requiring redundant RADIUS resources across three geographical regions, with the scale of operations as described, opting for six C3000V Virtual Policy Manager licenses would ensure adequate capacity and redundancy. The C3000V model is designed to cater to larger deployments, offering high-capacity RADIUS services suitable for environments with thousands of clients and devices requiring authentication and health validation. By deploying two C3000V instances in each region (AMER, EMEA, and APAC), the financial institution can achieve both high availability and load balancing, ensuring that authentication services remain uninterrupted and efficient, even in the event of a server failure or during maintenance periods. This approach aligns with best practices for enterprise network design, emphasizing resilience and reliability in critical infrastructure components like authentication services.
NEW QUESTION # 37
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
The week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing the security on the wired network infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They have heard about dynamic segmentation and central and decentral overlay networks. For their POS systems, they need a low-latency network connection between the POS system and the POS server in the data center on the ship. Also, the CSO wants to enhance the WLAN security as well by tunneling all user traffic.
What solution fits the customer's requirements?
- A. Standardize on Aruba 6300 switches for the edge. 8320 for the RR. 8320 for the stub/border. 9240 for the WLAN Gateway, and utilize Aruba Central NetConductor
- B. Standardize on Aruba 6300 switches for the edge. 8320 for the RR. 8360 for the stub/border. 9240 for the WLAN Gateway, and utilize Aruba Central NetConductor.
- C. Standardize on Aruba 6300 switches for the edge. 8320 for the RR. 8360 for the stub/border, and utilize Aruba Central NetConductor
- D. Standardize on Aruba 6300 switches for the edge. 8325 for the RR. 8360 for the stub/border. 9240 for the WLAN Gateway, and utilize Aruba Central NetConductor.
- E. Standardize on Aruba 6200 switches for the edge. 8325 for the RR. 8360 for the stub/border, and utilize Aruba Central NetConductor
Answer: B
Explanation:
Considering the global cruise line company's requirement to enhance wired network security while ensuring low-latency connections for POS systems and tunneling all user traffic for WLAN security, the most fitting solution involves a combination of Aruba switches and gateway along with a network management and orchestration tool. Specifically, standardizing on Aruba 6300 switches for the edge layer caters to the need for high-performance, fan-less switches with 10GbE uplinks, matching the requirement for upgraded cabin and technical room connections. The Aruba 8320 as a Route Reflector (RR) and Aruba 8360 for the stub/border provide a robust core and distribution layer with high throughput and redundancy. The inclusion of a 9240 WLAN Gateway addresses the need for secure WLAN user traffic tunneling. Utilizing Aruba Central NetConductor enhances network management efficiency, security policy enforcement, anddynamic segmentation across the wired and wireless infrastructure, aligning with the ESP architecture from Aruba and meeting the company's security enhancement objectives.
NEW QUESTION # 38
What should be Included in an Executive Summary? (Placethe correct Items into the let at the right Order is no: Important Not all cottons win be used)
Answer:
Explanation:
Explanation:
For an Executive Summary, typically the following items should be included:
* Brief Summary
* Contact Information
* High-Level Design
* Purpose of the Document
* Recommendations
* Scope
* Target Audience
NEW QUESTION # 39
when is o Mode Conditioning Patch Cable required?
- A. A10GBase-LXd Transceiver Is operated with 62.5/125 cables up to 2 km.
- B. A1000Base-LX Transceiver is operated with 62.5/125 cables up to 500 m.
- C. A1000Base-SX Transceiver is operated with 62.5/125 cables up to 500 m.
- D. A10GBase-lR Transceiver is operated with 62 5/125 cables up to 500 m
Answer: B
Explanation:
Mode Conditioning Patch Cables (MCPs) are used in situations where long wavelength laser transceivers, such as the 1000Base-LX, are deployed over multimode fiber types like the 62.5/125 µm. The 1000Base-LX transceivers are designed primarily for use with single-mode fiber, but they can operate over multimode fiber using an MCP. The MCP is necessary because the core size of multimode fiber (62.5/125 µm) is significantly larger than that of single-mode fiber, which can lead to modal dispersion when a single-mode laser signal enters the multimode fiber. This dispersion can degrade the signal quality over longer distances. The MCP mitigates this issue by aligning the single-mode laser output from the transceiver to a specific launch point in the multimode fiber, thus minimizing dispersion and allowing for effective data transmission over distances up to 500 meters.
NEW QUESTION # 40
The current IT staff is used to working with legacy Aruba OS-S (ProCurve> equipment. They are worried that they cannot handle Aruba OS-CX switches due to the different command syntax. What are two ways to make the transition easier for them? (Select two.)
- A. ASP
- B. CL1 Reference Guide for Arouba OS-CX. Aruba OS-Switch,Comware at>d Cisco IOS
- C. create aliases
- D. Aruba CU Bank
Answer: B,C
Explanation:
To ease the transition for IT staff accustomed to legacy Aruba OS-S (ProCurve) equipment when moving to Aruba OS-CX switches, two effective approaches are creating aliases (Option A) and using the CLI Reference Guide for Aruba OS-CX, Aruba OS-Switch, Comware, and Cisco IOS (Option B). Aliases allow the creation of custom command shortcuts or mappings in Aruba OS-CX, which can mimic or resemble the commands staff are familiar with from Aruba OS-S, making the command-line interface (CLI) more intuitive for them.
The CLI Reference Guide is an invaluable resource that provides a comparative view of commands across different operating systems, including Aruba OS-CX and Aruba OS-S, helping staff understand the equivalent commands and functionalities in the new OS-CX environment. Both these tools can significantly reduce the learning curve and help the IT staff become proficient with Aruba OS-CX switches more quickly.
NEW QUESTION # 41
Which alternative source is best suited for site surveys or simul-ations if no floor plans are available?
- A. tire escape plan
- B. blank sheet of paper
- C. simple wall drawings
- D. Google Maps
Answer: A
Explanation:
When floor plans are not available for site surveys or simulations, the best alternative source to use is the fire escape plan (Option D). Fire escape plans are typically available in most buildings and provide a simplified layout of the premises, including walls, doors, and sometimes the location of permanent fixtures. While not as detailed as architectural floor plans, fire escape plans can offer enough information for initial site survey estimations and RF planning. They allow network designers to understand the basic layout and potential RF obstacles or coverage areas, making them a practical tool for preliminary wireless network planning and simulations in the absence of more detailed floor plans.
NEW QUESTION # 42
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
The week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing the security of the wired network Infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They have heard about dynamic segmentation and central and decentral overlay networks.
What would you advise as the most cost-efficient solution?
- A. Standardize on Aruba 6100 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- B. Standardize on Aruba 6000 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- C. Standardize on Aruba 6300 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- D. Standardize on Aruba 6200 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
Answer: C
Explanation:
Given the need to increase the security of the wired network infrastructure while being cost-efficient, advising the cruise line company to standardize on Aruba 6300 switches for the access layer is the most appropriate solution. The Aruba 6300 Series offers advanced features suitable for such environments, including high-performance, scalability, and enhanced security capabilities. Adding a cluster of 9240 Gateways for implementing central overlay networks on a User-Based Tunneling (UBT) basis further strengthens the network's security posture. This setup supports dynamic segmentation, which allows for the enforcement of consistent policies and secure access across the network, irrespective of the user or device type. This architecture not only meets the increased security requirements set forth by the cruise line's CSO but also aligns with the company's existing infrastructure and future refresh plans, ensuring cost-efficiency and sustainability.
NEW QUESTION # 43
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
The IT staff at ACME retail is asking for recommendations to support Aruba deployment-Based on the limited information provided, what training should you recommend?
- A. Airwave class
- B. YouTube
- C. HPE Aruba Networking EducationServices training credits
- D. Airheads community
- E. datasheets
Answer: C
Explanation:
For ACME Retail's IT staff, who are looking to support an Aruba deployment, HPE Aruba Networking Education Services training credits would be the most beneficial recommendation. These training credits offer access to comprehensive, formal training courses on Aruba products and solutions, covering various aspects such as design, implementation, administration, and troubleshooting. The structured curriculum provided by HPE Aruba Education Services is tailored to enhance the technical skills and knowledge of IT professionals, ensuring they are well-equipped to deploy, manage, and optimize Aruba networking solutions effectively. This formal training would be more effective than informal sources like datasheets, YouTube, or community forums for building a strong foundation in Aruba technologies and preparing the IT staff for the deployment and long-term management of the new network infrastructure.
NEW QUESTION # 44
You aregoingwith a 3-tierdesign and need to calculate the oversubscription ratio ontheAccess. Distribution.
Core, and ToR Layer. Whatis a suitable oversubscriptionratio for each layer?
Answer:
Explanation:
Explanation:
Access - 20:1Aggregation - 4:1Core - 2:1
ToR - Not typically applicable in a 3-tier design; however, if ToR were used, it could be 24:1 or better depending on the specific design and requirements.
NEW QUESTION # 45
Based on this campus design, click on the layer that is the most appropriate to be designed as a Stub Persona, considering an EVPN VXLAN Fabric?
Answer:
Explanation:
Explanation:
In an EVPN VXLAN Fabric, the most appropriate layer to be designed as a Stub Persona, which typically refers to the edge or endpoint of a network with simplified routing and forwarding, would be the "Access" layer. This is where endpoints, such as user devices, connect to the network, and it's where you would typically implement simplified network protocols that do not require full routing information.
The Access layer is the entry point for endpoints into the network fabric, and it benefits from EVPN VXLAN by segmenting traffic and providing layer 2 connectivity over a layer 3 fabric without the need for complex routing protocols. The stub would not need the full capabilities of the core or aggregation layers, making the Access layer the ideal candidate.
NEW QUESTION # 46
What is the difference between 0M4 and 0M5 cabling? (Select two)
- A. 0M4 supports distances up to 100 m. while 0M5 supports distances up to 150 m using 100 GBps transceivers.
- B. 0M5 supports Multiplexing operating in the 850 to 950 nm range, while 0M4 does not
- C. 0M5 supports speeds up to 100 Gbps. while OM4 does not.
- D. 0M5 is approved as wide Band Multimode Fiber (WBMMF). while 0M4 Is not.
Answer: A,D
Explanation:
The primary differences between OM4 and OM5 cabling include their support for transmission distances and the type of multimode fiber. OM4 fiber supports distances up to 100 meters when using 100 Gbps transceivers (Option A), which is suitable for most data center and enterprise networking applications. OM5, also known as Wide Band Multimode Fiber (WBMMF) (Option C), extends this capability by supporting higher wavelengths in the 850 to 950 nm range, allowing for more efficient multiplexing and potentially longer distances or higher bandwidths under certain conditions. This makes OM5 a more versatile and future-proof option for organizations looking to deploy advanced technologies like shortwave division multiplexing.
NEW QUESTION # 47
A customer wants to have the ability to show network usage. Which product would allow them to have this visibility?
- A. ClearPass
- B. Central
- C. Aruba OS 8.X
- D. UXI
Answer: B
Explanation:
Aruba Central provides a cloud-based management platform for managing and monitoring Aruba Instant APs, switches, and branch gateways. It offers a comprehensive dashboard that gives insights into network usage, health, and performance metrics. Central allows network administrators to have visibility over their entire network infrastructure from a single pane of glass, including detailed usage statistics, which can be broken down by device, application, and time. This visibility into network usage is crucial for optimizing network performance, planning capacity, and understanding user behavior. Aruba Central's analytics and reporting capabilities enable customers to track and analyze network usage, making it the appropriate product choice for customers wanting to monitor their network usage closely.
NEW QUESTION # 48
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based networkinfrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client has provided floorplans. wall density, and ceiling heights tor the wireless deployment in the carpeted office space What else will be needed to write an accurate bill of material? (Select two)
- A. ceiling construction details
- B. PoE port details
- C. sprinkler details
- D. flooring information
Answer: A,B
Explanation:
Ceiling construction details are essential for a wireless deployment because the material and structure of the ceiling can affect the propagation of wireless signals. Different materials can absorb or reflect RF signals differently, impacting coverage and signal strength. Understanding ceiling construction helps in planning the placement of access points for optimal coverage and performance. PoE (Power over Ethernet) port details are necessary to ensure that the wired network infrastructure can provide power to the access points and other PoE-enabled devices like VoIP phones and cameras. This information is critical for planning the power budget and ensuring that the network can support the power requirements of all connected devices, ensuring a stable and reliable network infrastructure.
NEW QUESTION # 49
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches arelocated in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on the best practices, what should you recommend as the most cost-effective switch model for the cabins?
- A. HPE Aruba Networking 6200F 12g Class4 PoE 2G/2SFP+
- B. HPE Aruba Networking 6100 246 Class4 PoE 45FP+
- C. HPE Aruba Networking 6000 126 Class4 PoE 2G/2SFP
- D. HPE Aruba Networking 6100126 Classd PoE 26/2SFP+
Answer: A
Explanation:
For the cabin switches in the global cruise line's fleet refresh project, the most cost-effective switch model that meets the requirement for fan-less operation, 10GbE uplink capability, and PoE support is the HPE Aruba Networking 6200F 12G Class4 PoE 2G/2SFP+. This switch model offers a compact form factor with sufficient port density for cabin connectivity, Power over Ethernet for powering devices directly through the network cable, and SFP+ ports for high-speed uplink connections to the distribution switches. This choice is in line with the company's aim to upgrade the network infrastructure to handle increased traffic while maintaining a focus on cost-effectiveness and sustainability. The 6200F series is designed for exactly such environments, providing reliable performance and energy efficiency, which is crucial for the limited space and power availability in a ship setting.
NEW QUESTION # 50
Which is true with regard to device capabilities?
- A. Aruba's best practice is to use whatever the AP model supports as a maximum.
- B. You should determine If devices support 2 A GHz or 5 GHz. No consideration Is yet required for 6 GHz as It has yet to be ratified,
- C. Wi-Fi 6E supports 6 GHz for both indoor and outdoor deployments since it was ratified in April of
2020. - D. Aruba recommends ao-50 devices per radio for a generic office deployment.
Answer: D
Explanation:
Aruba's recommendation for device density in a generic office environment is based on achieving optimal performance and user experience. The suggestion to support 30-50 devices per radio takes into account the typical bandwidth requirements, application usage, and performance expectations in an office setting. This range is designed to ensure that the wireless network can adequately support the number of devices without significant degradation in service quality. It balances the need for connectivity with the practical limits of wireless technology, ensuring that each device maintains a reliable connection and adequate throughput. This recommendation is part of Aruba's best practices for network design and deployment, aimed at providing efficient and effective wireless coverage in office environments.
NEW QUESTION # 51
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on best practices, what should you recommend as the correct optic type for the connection between the IDF and the technical rooms?
- A. Aruba 100 LC BID! 40 km-0 1330/1270 XCVR
- B. Aruba 106 SFP- LC LRM 220 m MMF Transceiver
- C. Aruba 106 SFP+ LC SR 300 m MMF Transceiver
- D. Aruba 10GBASE-T SFP- RJ-45 30 m Cat6A Transceiver
Answer: C
Explanation:
For the connection between the IDF and the technical rooms, which requires support for lengths between 100 and 150 meters (320 and 500 ft), the Aruba 10G SFP+ LC SR 300 m MMFTransceiver is the recommended optic type. This transceiver is designed for short-range multimode fiber connections and can support distances up to 300 meters, making it suitable for the specified lengths within the technical rooms on the cruise ship. The SR (Short Range) designation ensures that this transceiver is optimized for the distances involved in connecting the IDFs to the technical rooms, providing high-speed 10GbE connectivity to meet the increased network traffic demands. This choice aligns with the cruise line company's requirements for a sustainable and cost-effective network refresh that accommodates future expansion without extensive unused capacities.
NEW QUESTION # 52
......
Dumps Brief Outline Of The HPE7-A03 Exam: https://www.braindumpquiz.com/HPE7-A03-exam-material.html
Use Real HPE7-A03 - 100% Cover Real Exam Questions: https://drive.google.com/open?id=1wnh2GackNPuOk1XSqIN3ALQG9DWCi9o8