[Oct-2021] Pass Network Appliance NS0-519 Exam in First Attempt Guaranteed!
Full NS0-519 Practice Test and 60 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 22
Click the Exhibit button.
You have an 8-node AFF A800 ONTAP 9.7 cluster. You have sixteen SVMs that serve NVMe namespaces using two 32 Gb FC ports per AFF A800 controller.
Referring to the exhibit, what is the maximum number of NVMe data LIFs that are supported on this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 23
Your company has begun to require additional restrictions on systems in the cloud. To comply with these new restrictions, you must have all incoming connections authorized to your Cloud Volumes ONTAP instance in Amazon Web Services (AWS).
Which two features enable you to satisfy your company's requirements for Red Hat Enterprise Linux 7 iSCSI hosts? (Choose two.)
- A. iSCSI endpoint isolation
- B. Challenge-Handshake Authentication Protocol (CHAP)
- C. single initiator zoning
- D. routing failover groups
Answer: A,B
NEW QUESTION 24
Click the Exhibit button.
Referring to the exhibit, which two Fibre Channel names should you zone on the FC switch to provide connectivity to the LUN? (Choose two.)
- A. 50:0a:09:82:9c:16:cc:00
- B. 20:00:00:50:56:9c:16:cc
- C. 50:0a:09:82:9c:7a:4e:00
- D. 20:01:00:50:56:9c:16:cc
Answer: B,D
NEW QUESTION 25
You have a new 2-node AFF All SAN Array A700 cluster serving iSCSI LUNs. You are asked to test failures of the storage back-end subsystem.
In this scenario, which two actions satisfy the failure criteria? (Choose two.)
- A. Disable Snapshot policies.
- B. Pull an Ethernet cable from a Linux host.
- C. Pull an Ethernet cable from a storage port with a cluster LIF.
- D. Perform a storage controller failover.
Answer: C,D
NEW QUESTION 26
An administrator wants to connect a DS460C disk shelf to a FAS9000.
Which two statements are correct in this scenario? (Choose two.)
- A. A deep rack is required
- B. A Telco rack is required
- C. A C13/C14 power cable and compatible rack power distribution unit are required.
- D. A C19/C20 power cable and compatible rack power distribution unit are required.
Answer: A,C
NEW QUESTION 27
Click the Exhibit button.
You need to perform an automated non-disruptive upgrade from ONTAP 9.5 to ONTAP 9.7.
Referring to the exhibit, which tool would be used?
- A. AutoSupport OnDemand
- B. OneCollect
- C. Perfstat
- D. Upgrade Advisor
Answer: D
NEW QUESTION 28
You are an administrator of a multi-tenanted cluster which hosts multiple SVMs. One of your tenants requires management access to their SVM for SnapCenter to perform a backup. You are asked by the backup team to create a dedicated user account and management LIF for this purpose.
In this scenario, which LIF role would be associated with management access?
- A. Intercluster
- B. Cluster
- C. Data
- D. Node Management
Answer: D
NEW QUESTION 29
You are asked to increase the size of your existing 4-node FAS8060 cluster running ONTAP 9.7 software with four additional AFF A700 nodes.
Which tool enables you to confirm that this will be a valid addition?
- A. Active IQ OneCollect
- B. Active IQ Config Advisor
- C. Hardware Universe (HWU)
- D. Active IQ
Answer: C
NEW QUESTION 30
Click the Exhibit button.
An administrator has added two nodes to an existing cluster. The administrator created the svfc2 SVM to use FC to present LUNs to hosts. The hosts are unable to see the LUNs that have been presented to them.
Referring to the exhibit, what is the problem?
- A. The FC protocol needs to be added to the allowed protocols list.
- B. The UTA mode change Is pending a reboot.
- C. The FC ports show the status of admin down.
- D. The FC service on the SVM has been stopped.
Answer: B
NEW QUESTION 31
An administrator is planning to rehost a SAN volume from one SVM to another SVM on a FAS8300 with all hard disk drives.
After rehosting the volume, what are two policies that must be reconfigured? (Choose two.)
- A. caching policy
- B. snapshot policy
- C. export policy
- D. volume efficiency policy
Answer: B,D
NEW QUESTION 32
An administrator added the FCP protocol to an SVM and created a LUN for a Windows Server 2019 server. After a rescan, the LUN is not visible on the host.
Which two statements describe how to solve this problem? (Choose two.)
- A. Perform takeover and giveback of both controllers.
- B. Disable and enable the FC port with the attached host, causing a FLOGI.
- C. Create a zone with a single initiator and the target LIF's WWPN.
- D. Create an igroup, add the WWPN of the host initiator, and then map the igroup to the LUN.
Answer: C,D
NEW QUESTION 33
An administrator is testing a newly deployed SAN configuration and wants to simulate a node failure by administratively taking all FC physical ports down on a node that is serving data.
In this scenario, what should the administrator observe?
- A. ANA path states change to use the direct paths of the HA partner to serve data.
- B. ALUA path states change to use the direct paths of the HA partner to serve data.
- C. Host multipath drivers use the HA partner's direct paths to serve data.
- D. Host multipath drivers use any indirect path on the cluster to serve data.
Answer: D
NEW QUESTION 34
Click the Exhibit button.
Referring to the exhibit, which container obtains space savings from deduplication, compression, and compaction?
- A. the qtree
- B. the aggregate
- C. the volume
- D. the LUN
Answer: B
NEW QUESTION 35
An administrator is asked to provide enhanced security measures to an iSCSI LUN using the Challenge Handshake Authentication Protocol (CHAP) with the iscsi security create command.
In this scenario, for which two objects should the administrator configure CHAP? (Choose two.)
- A. for the volume containing the iSCSI LUN
- B. for the iSCSI LUN
- C. for the initiator IQN or EUI
- D. for the target IQN or EUI
Answer: B,C
NEW QUESTION 36
Click the Exhibit button.
Referring to the dual-fabric cabling diagram shown in the exhibit, which scenario explains why the customer's iSCSI host experienced a SAN outage with a LUN on Node 2?
- A. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included Node 1 and Node 2, and Node 1 went down.
- B. iSCSI LIFs were configured on Node 1 and Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and Switch 1 went down.
- C. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included all nodes, and Node 1 and Node 2 went down.
- D. iSCSI LIFs were configured on Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and the cable connecting the host to Switch 1 went bad.
Answer: C
NEW QUESTION 37
Click the Exhibit button.
The storage system reports that one or more of the FC LIFs have the administratively up and operationally down status. Initiators are unable to connect to the affected LIFs or access LUNs that are presented by those LIFs.
Referring to the exhibit, which command fields provide port login details with the switch?
- A. media-type
- B. conn-established
- C. status-extended
- D. fabric-established
Answer: D
NEW QUESTION 38
You just finished installing and configuring a new NetApp AFF All SAN Array environment.
In this scenario, which two tools would you use to verify that the environment satisfies best practices? (Choose two.)
- A. Active IQ OneCollect
- B. Active IQ Config Advisor
- C. ONTAP System Manager
- D. Active IQ Unified Manager
Answer: B,D
NEW QUESTION 39
An administrator suspects abnormal operation and performance-related issues within a particular SAN environment. The administrator wants to further investigate the environment in terms of overall health, best practice recommendations, proactive remediation, and risk assessments, as compared to other SAN deployments.
Which tool should the administrator use to assess this information?
- A. Active IQ OneCollect
- B. Active IQ Config Advisor
- C. Interoperability Matrix Tool (IMT)
- D. Active IQ
Answer: B
NEW QUESTION 40
Click the Exhibit button.
You have three Linux hosts that are FC multipath connected to an AFF All SAN Array A700. A failover test is performed by shutting down both Fabric A and N2, as shown in the exhibit.
Referring to this exhibit, what happens to the remaining paths from the Linux hosts to the ASA A700 target?
- A. All paths are active-optimized (AO).
- B. Half of the paths are active-non-optimized (ANO) and the other half are active-optimized (AO).
- C. All paths are active-non-optimized (ANO).
- D. All paths go offline from the double failure of the switch and node.
Answer: A
NEW QUESTION 41
An additional LUN is required to be created and attached to an existing VMware ESXi environment. You are asked by a VMware administrator what NetApp software would validate multi-path connections to a newly presented FC LUN.
In this scenario, which NetApp software is required?
- A. You must install Active IQ Config Advisor.
- B. You must install the NetApp VSC.
- C. You must install Active IQ OneCollect.
- D. You must Install the DSM onto the virtual machine.
Answer: D
NEW QUESTION 42
Click the Exhibit button.
You issue the cfgshow command on one of your Brocade switches and notice that there is no zoning listed under the Effective configuration. When you attempt to use the fcping command from the initiator to the target, the command fails.
Referring to the exhibit, what are two problems? (Choose two.)
- A. The default zone access is set to allow even though zoning is defined.
- B. There is no zoning configured, and the default zone's access is set to No Access.
- C. There is no alias for either the initiator or the target.
- D. There is no zone defined that has both the initiator and target in a common zone.
Answer: B,D
NEW QUESTION 43
Click the Exhibit button.
Referring to the exhibit, which switch in the fabric is the principal switch?
- A. sw6
- B. sw5
- C. sw4
- D. sw10
Answer: A
NEW QUESTION 44
What information should you document about your storage fabrics? (Choose two.)
- A. name service
- B. Inter-Switch Links (ISLs)
- C. igroup name
- D. zoning configuration
Answer: B,D
NEW QUESTION 45
A database owner requests that two additional hosts be added to an application server cluster.
This brings the host count for the fabric to 10. The company's internal procedure is to set SAN hosts with a queue depth of 256.
The FAS8300 2-node cluster is configured with one HBA per node with one port connected to fabric A and one port connected to fabric B.
Users complain about inconsistent performance.
What must the storage administrator do to ensure continuous operation of the hosts in this new configuration?
- A. Reduce the queue depth of the hosts such that the total does not exceed 2048.
- B. Create two additional LIFs per node on the FAS8300 cluster.
- C. Add two more hosts to the application server cluster.
- D. Reduce the number of LIFs per node on the FAS8300 cluster.
Answer: A
NEW QUESTION 46
......
Get Latest NS0-519 Dumps Exam Questions in here: https://www.braindumpquiz.com/NS0-519-exam-material.html