Juniper New 2024 JN0-682 Test Tutorial (Updated 130 Questions) [Q69-Q88]

Juniper New 2024 JN0-682 Test Tutorial (Updated 130 Questions)

JN0-682 Exam Questions Dumps, Selling Juniper Products

NEW QUESTION # 69
You are troubleshooting a traditional Clos Layer 3 IP fabric in your data center. You are reviewing the BGP configuration for one of your spine devices.
Referring to the exhibit, which statement is correct?

A. This spine device has three neighboring leaf devices.
B. This spine device will not install any routes for remote destinations in its routing table.
C. This spine device will not install multiple next hops for remote destinations in its routing table.
D. This spine device has three neighboring spine devices.

Answer: A

NEW QUESTION # 70
You are deploying a VXLAN using signaling overlay network in your new data center. You are able to establish your MP BGP peering session and see your EVPN routes, but traffic will not traverse the VXLAN using signaling overlay network.
What is a solution to this problem?

A. Enable the mtu-discovery feature on the MP peering sessions between VXLAN ANs EVPN signaling peers.
B. Increase the physical MTU on all ports on all devices participating in VXLAN using EVPN signaling.
C. Increase the MTU on the logical VTEP source interface of all devices participating in VXLAN using EVPN signaling.
D. Increase the protocol MTU on all devices participating in VXLAN using EVPN signaling

Answer: B

NEW QUESTION # 71
You want to configure redundant Layer 3 gateways
In this scenario, which two juniper best practices would accomplish this task? (Choose two.)

A. Configuring both IRB interfaces manually with the same IP address
B. Configuring both IRB interfaces manually with the same address
C. Allowing Junos to dynamically create the virtual IP address of the IRB interface
D. Allowing Junos to dynamically create the virtual MAC address of the IRB interface

Answer: A,C

NEW QUESTION # 72
A VXLAN has been created between devices leaf1 and leaf3.

Referring to the exhibit, which statement is true?

A. Traffic sent from host1 to host2 will be tagged with VLAN ID 100 when existing leaf3
B. Traffic sent from host1 to host2 will be tagged with VLAN ID 200 when existing leaf3
C. Traffic sent from host1 to host2 will be dropped on leaf3
D. Traffic sent from host1 to host2 will be dropped on leaf1.

Answer: B

NEW QUESTION # 73
Exhibit.

Referring to the exhibit, which two statements are correct? (Choose two.)

A. The local leaf is using the 192.168.100.102 IP address as the local anchor point of the VTEP tunnel.
B. The remote leaf is using the 192.168.100.102 IP address as the local anchor point of the VTEP tunnel.
C. The local leaf is using the 192.168.100.101 IP address as the local anchor point of the VTEP tunnel.
D. The remote leaf is using the 192.168.100.101 IP address as the local anchor point of the VTEP tunnel.

Answer: D

NEW QUESTION # 74
You are building an IP fabric underlay for your data center. You are asked to ensure that the two spine devices are in the same AS (65000) while the six leaf devices are in a different AS (65512).
In this scenario, which two statements are correct by default? (Choose two.)

A. All BGP routes advertised by a leaf device will be accepted on the spine devices.
B. A leaf device will accept all BGP routes received from the spine that were originated from another leaf device.
C. All BGP routes advertised by a leaf device will be rejected on the spine devices.
D. A leaf device will reject all BGP routes received from the spine that were originated from another leaf device.

Answer: A,C

NEW QUESTION # 75
Exhibit.

A VXLAN has been created between devices leaf1 and Ieaf3.
Referring to the exhibit, which statement is true?

A. Traffic sent from host1 to host2 will be tagged with VLAN ID 200 when exiting Ieaf3.
B. Traffic sent from host1 to host2 will be tagged with VLAN ID 100 when exiting Ieaf3.
C. Traffic sent from host1 to host2 will be dropped on Ieaf3.
D. Traffic sent from host1 to host2 will be dropped on leaf1.

Answer: D

NEW QUESTION # 76
Exhibit.

A VXLAN has been created between devices leaf1 and Ieaf3.
Referring to the exhibit, which statement is true?

A. Traffic sent from host1 to host2 will be tagged with VLAN ID 200 when exiting Ieaf3.
B. Traffic sent from host1 to host2 will be dropped on Ieaf3.
C. Traffic sent from host1 to host2 will be tagged with VLAN ID 100 when exiting Ieaf3.
D. Traffic sent from host1 to host2 will be dropped on leaf1.

Answer: C

NEW QUESTION # 77
You are deploying a switch using ZTP.
Which two statements are true in this scenario? (Choose two.)

A. Using DHCP Option 150. the DHCP server informs the switch of a software image name.
B. Using DHCP Option 43 sub option 01, the DHCP server informs the switch of the configuration file name.
C. If no configuration file is referenced in DHCP Options, the switch downloads a default configuration file from the storage server.
D. If the switch is already running the referenced image, no action is performed and the switch moves to the next ZTP step in the ZTP process.

Answer: B,D

NEW QUESTION # 78
You are asked to scale the available bandwidth within your Clos data center network to support more east-west traffic. In this scenario, what are two ways to accomplish this task? (Choose two.)

A. Add leaf devices to increase available paths and bandwidth
B. Add spines to increase available paths and bandwidth.
C. Use aggregated interfaces in the fabric.
D. Interconnect all spines to increase available paths and bandwidth.

Answer: B,C

NEW QUESTION # 79
You have deployed two data centers that require a Layer 2 stretch between host1 and host2.

Referring to the exhibit, what does a Layer 2 stretch require?

A. A VXLAN tunnel originating on VTEP1 to VTEP2
B. A VXLAN tunnel originating on the Spine Layer in DC1 to the Spine Layer in DC2.
C. A VPLS WAN connection data centers
D. A VXLAN tunnel originating on the super Spine Layer in DC1 to the Super Spine Layer in DC2

Answer: A

NEW QUESTION # 80
A company wants to expect their hosting business and is seeking solutions to supported multiple tenants. Each
tenant should be able to configure their own logical interfaces. Also, based on customer needs, all routing
features must be supported.
What will satisfy the customer's requirements?

A. Bridge domains
B. Routing instances
C. Tenant systems
D. Logical systems

Answer: D

Explanation:
Explanation
Logical systems support all routing protocols and the client will be able to configure all the attributes of the
logical interfaces
https://www.juniper.net/documentation/us/en/software/junos/logical-system-security/topics/topic-map/tenant-sys

NEW QUESTION # 81
You are implementing perimeter security for your data center. You need to inspect all traffic Layer 7 and
ensure the failure of a port or device will not result in an interruption to traffic flows.
In this scenario, which design would satisfy these requirements?

A. MX with MC LAG
B. QFX Virtual Chassis
C. SRX using LAG
D. SRX Chassis cluster

Answer: D

NEW QUESTION # 82
You are configuring a DCI VPN solution between sites that require an L3VPN to work with your EVPN deployment. Your organization's policy restricts configuring RSVP and LDP on your WAN links. While configuring the solution, you notice that no routes exist in the inet table.
In this scenario, which parameter will solve this problem?

A. bgp family evpn signaling
B. bgp family inet labeled-unicast resolve-vpn
C. bgp family inet labeled-unicast aggregate-label
D. bgp family inet labeled-unicast per-group-label

Answer: A

NEW QUESTION # 83
You are implementing perimeter security for your data center. You need to inspect all traffic Layer
7 and ensure the failure of a port or device will not result in an interruption to traffic flows. In this scenario, which design would satisfy these requirements?

A. MX with MC LAG
B. QFX Virtual Chassis
C. SRX using LAG
D. SRX Chassis cluster

Answer: D

NEW QUESTION # 84
You are troubleshooting a traditional Clos Layer 3 IP fabric in your data center. You are reviewing the BGP configuration for one of your spine devices.

Referring to the exhibit, which statement is correct?

A. This spine device has three neighboring leaf devices.
B. This spine device will not install any routes for remote destinations in its routing table.
C. This spine device will not install multiple next hops for remote destinations in its routing table.
D. This spine device has three neighboring spine devices.

Answer: A

NEW QUESTION # 85
Which two combinations are supported when configuring a Virtual Chassis Fabric? (Choose two.)

A. Four spine nods with 16 leaf nodes
B. Four spine nods and 20 leaf nodes
C. two spine nods and 16 leaf nodes
D. Two spine and 28 leaf nodes

Answer: A,C

NEW QUESTION # 86
Referring to the exhibit, each node in the IP fabric is peering to its directly attached neighbor using EBGP.
Each node is peering using physical interface IP addresses. Leaf 2 and Leaf 3 are advertising the 10.1.1/24
network into EBGP. Spine 2 must be configured so that it can load-share traffic destined to the 10 1.1/24
network over both next-hop A and next-hop B.

Which two actions must be performed to accomplish this task? (Choose two.)

A. Use a load-balancing policy applied to the forward table
B. Use multipath multipath-As
C. Use multihop
D. Use advertise inactive

Answer: A,B

NEW QUESTION # 87
You are asked to build a single export policy that can be applied to all devices to advertise only loopback IP addresses in the 172.16.0.0/24 subnet into your EBGP IP fabric. In this scenario, which two solutions would accomplish this task? (Choose two.) A)

B)

C)

D)