[Full-Version] 2021 New BraindumpQuiz 300-610 PDF Recently Updated Questions
300-610 Exam with Guarantee Updated 120 Questions
Which Skills Are Covered in the Exam?
This exam is an extensive one and tries to validate the test-takers’ skills in a broad range of topics. The prime focus is on data center infrastructure-related areas such as automation of networks, networking computing, and storage management. The details of the content are as follows:
1. Network Design
- Weightage allotted – 35%
This is the most widespread domain in Cisco 300-610 syllabus. It tries to educate the learner about evaluating options for Layer 2 and layer 3 connectivity. Topics like endpoint mobility, convergence, service insertion, IP mobility, and redundancy are covered here as well. In addition, the section requires candidates to be able to be knowledgeable about the details related to evaluating data center technologies like vPC, skills in assessing the available options for device & routing virtualization, such as VDC and VRF, and evaluating in-band and out-of-band options for management as well as work with redundancy.
Cisco 300-610 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
NEW QUESTION 57
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. Ethernet and unified ports on the same port channel
- B. vPC that has unified uplinks
- C. VSS that has unified uplinks
- D. cross-connections with pinning
Answer: B
Explanation:
Section: Storage Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc11
NEW QUESTION 58
A company owns a large-scale compute infrastructure that consists of over 1000 servers and virtual machines. The operational complexity continues to grow with additional policies and servers added to the environment. An infrastructure engineer is looking for an automation tool to reduce the operational complexity of configuring complex infrastructure. Because of the strict security requirements, the tool must be agentless, use the secure shell for transport, and be extendable using existing Python modules. Which tool meets these requirements?
- A. Saltstack
- B. Ansible
- C. NSO
- D. Puppet
Answer: B
NEW QUESTION 59
Refer to the exhibit.
The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?
- A. 2158 bytes
- B. 2240 bytes
- C. 2000 bytes
- D. 9000 bytes
Answer: C
NEW QUESTION 60
A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?
- A. vPC
- B. physical port
- C. virtual interface
- D. port channel
Answer: C
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-6300-series- fabric-interconnects/cisco-unified-fabric.pdf
NEW QUESTION 61
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION 62
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- B. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- C. end-host mode feature on the Cisco UCS Fabric Interconnects
- D. NPV feature on the Cisco MDS Series.
- E. NPIV feature on the Cisco MDS Series
Answer: D,E
NEW QUESTION 63
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION 64
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION 65
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION 66
What influences the number of ISLs that are required between Cisco MDS Series switches?
- A. end-to-end oversubscription ratio
- B. type of storage
- C. FCoE protocol
- D. N Port virtualization
Answer: A
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-series-multilayer- directors/white-paper-c11-729697.html
NEW QUESTION 67
A storage engineer requires a solution that achieves multiple paths between a server and storage array. The design must support complete traffic isolation and support a 50% growth in the next year.
Which FCoE solution meets these requirements?
- A. at least two VSANs across the fabric
- B. single VSAN across the fabric
- C. single switch with multiple links
- D. at least two FC zone sets with multiple zones
Answer: A
NEW QUESTION 68
An engineer must interconnect two geographically separated data centers. The service provide offers a Layer 2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?
- A. MACsec
- B. L2TPv2
- C. IPsec
- D. L2TPv3
Answer: A
Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/Enterprise/Security/MACsec/WP-High-Speed-WAN-Encrypt-MACsec.pdf
NEW QUESTION 69
A network design must include a solution to run CLI commands remotely on Cisco Nexus 9000 Series Switches. The customer's security policy requires secure login credentials and an encrypted underlying transport. The command output will be processed using tools that support XML or JSON encoding. Which two components should be included in the design? (Choose two.)
- A. HTTPS
- B. SSH
- C. Bash shell
- D. NX-API
- E. HTTP
Answer: A,B
NEW QUESTION 70
Refer to the exhibit.
The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?
- A. 2158 bytes
- B. 2240 bytes
- C. 2000 bytes
- D. 9000 bytes
Answer: C
NEW QUESTION 71
An engineer must design a VXLAN EVPN network. The solution should optimize broadcast, unknown unicast, and multicast (BUM) and short BUM replication, and use PIM anycast RP. Which solution should be included in the design?
- A. PIM sparse mode
- B. PIM dense mode
- C. head-end replication
- D. ingress replication
Answer: A
NEW QUESTION 72
An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch? Which two technologies meet this requirement? (Choose two.)
- A. 802.1q
- B. vPC
- C. HSRP
- D. VSS
- E. FEX
Answer: B,D
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/C07-
572835-00_NX-OS_vPC_DG.pdf
NEW QUESTION 73
A customer wants to deploy a Layer 2 extension over a transport infrastructure for multiple data centers. The data center technology should support a localized Layer 3 gateway, a separate flooding domain, and STP isolation per data center. Which DCI technology meets these requirements?
- A. VXLAN EVPN
- B. E-Line
- C. E-LAN
- D. Pseudowire
Answer: A
NEW QUESTION 74
An engineer must interconnect two geographically separated data centers. The service provide offers a Layer 2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?
- A. MACsec
- B. L2TPv2
- C. IPsec
- D. L2TPv3
Answer: A
Explanation:
Reference:
NEW QUESTION 75
What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)
- A. It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.
- B. It operates at the customer-facing services layer and provides the management interface for the virtual network devices.
- C. It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.
- D. It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.
- E. It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer.
Answer: A,D
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/net_mgmt/msx/3_4/solution_overview/ Cisco_VMS_Sol_Overview.pdf
NEW QUESTION 76
Which two automation requirements can be met by using Puppet? (Choose two.)
- A. Enable clients to pull changes to configuration files.
- B. Push configuration updates immediately to servers.
- C. Provide support for writing new modules in Python.
- D. Enable clients to pull changes without installing an agent.
- E. Enable one-off infrastructure changes to be performed manually.
Answer: A,B
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series- rack-servers/whitepaper_c11-740103.pdf
NEW QUESTION 77
An engineer is designing a Cisco Nexus 7000 Series disaster recovery site using the data center interconnect solution to provide gateway redundancy and needs to ensure that devices use gateways in their own data centers.
Which design approach should be used to accomplish this goal?
- A. CFS localized to its own data center
- B. FHRP localized to its own data center
- C. STP localized to its own data center
- D. vPC localized to its own data center
Answer: B
NEW QUESTION 78
A company must introduce a scalable network automation tool to deploy, configure, and manage thousands of network devices and servers. The company servers already have been security-hardened and must not have any additional software installed on them. The security policy mandates the use of a secure communication protocol that supports authentication and encryption for managing the servers.
Which two automation tools must be used to meet these requirements? (Choose two.)
- A. CFEngine
- B. Ansible
- C. SaltStack
- D. Chef
- E. Puppet
Answer: C,E
NEW QUESTION 79
Where does Cisco UCS handle Fibre Channel traffic failover?
- A. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
- B. in the hardware on any Cisco UCS VIC adapter
- C. on the host, by using multipathing software
- D. in the hardware on the Cisco UCS VIC 12xx adapter or later
Answer: C
NEW QUESTION 80
......
Other Study Options
For self-study, it is better to choose well-structured materials that ensure learning the topics one-by-one in a smooth manner. Amazon can also improve your learning with books like “How I Passed Designing Cisco Data Center Infrastructure Exam” by Rocismo Liolentz Publications. It is available in the form of Kindle edition and is focused on not just concepts of the exam but helpful test-taking tips and methodologies.
Latest 300-610 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.braindumpquiz.com/300-610-exam-material.html
300-610 Updated Exam Dumps [2021] Practice Valid Exam Dumps Question: https://drive.google.com/open?id=14vxMf_KIyu0a-5XHJNaKGuKuaBGJkk43