Cisco 300-430 Real Exam Questions Guaranteed Updated Dump from BraindumpQuiz
Verified Pass 300-430 Exam in First Attempt Guaranteed
What Are the Career Opportunities Available?
After all the effort you put to pass the exam and get your certification, you deserve to be rewarded with a higher salary. The Cisco Certified Specialist – Enterprise Wireless Implementation certificate opens many opportunities, making you compatible for the roles like:
- Wireless network engineer
- Network designer
- Sales engineer
If you apply for the position of network designer, then you should know that according to Payscale.com, you can win around $80k on average per year. You can get a similar salary if you decide to work as a Wireless Network engineer which is approximately $81k. Still, in case one obtains the CCNP Enterprise certification, job opportunities expand, and even the average salary raises to $86k per annum.
NEW QUESTION 30
An enterprise has two WLANs configured on WLC. It is reported that when converting APs to FlexConnect mode. WLAN A works but WLAN B does not. When converting APs to local mode. WLAN B works, but WLAN A does not. Which action is needed to complete this configuration?
- A. Create a Cisco FlexConnect group with WLAN-VLAN mapping.
- B. Map the AP group to the WLAN interface.
- C. Disable local switching on the WLANs.
- D. Join the APs to a Cisco FlexConnect group.
Answer: A
Explanation:
NEW QUESTION 31
A company is collecting the requirements for an on-premises event. During the event, a wireless client connected to a dedicated WLAN will run a video application that will need to average 300000000 bits per second to function properly. What is the QoS marketing that needs to be applied to that WLAN?
- A. Platinum
- B. Bronze
- C. Gold
- D. Silver
Answer: C
NEW QUESTION 32
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
- A. connect and engage
- B. detect and locate.
- C. analytics
- D. presence
Answer: B
Explanation:
NEW QUESTION 33
An engineer must implement intrusion protection the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which Ap mode and submode must be implemented?
- A. Ap mode: local, Ap submode: WIPS
- B. Ap mode: monitor, Ap submode: WIPS
- C. Ap mode: monitor, Ap submode: none
- D. Ap mode: local, Ap submode: none
Answer: A
Explanation:
NEW QUESTION 34
An enterprise started using WebEx as a virtual meeting solution. There is a concern that the existing wireless network will not be able to support the increased amount of traffic as a result of using WebEx. An engineering needs to remark the QoS value for this application to ensure high quality in meetings. Which must be implemented to accomplish this task?
- A. AVC profiles
- B. QoS preferred call index
- C. UP to DSCP map
- D. WLAN quality of service profile
Answer: A
NEW QUESTION 35
Which two restrictions are in place with regards to configuring mDNS? (Choose two.)
- A. Controller software must be newer than 7.0.6+.
- B. mDNS is not supported over IPv6.
- C. mDNS is not supported on FlexConnect APs with a locally switched WLAN.
- D. mDNS cannot use UDP port 5353 as the destination port.
- E. mDNS uses only UDP port 5436 as a destination port.
Answer: B,C
Explanation:
NEW QUESTION 36
A customer is experiencing performance issues with its wireless network and asks a wireless engineer to provide information about all sources of interference and their impacts to the wireless network over the past few days. Where can the requested information be accessed?
- A. Air Quality reports on Cisco Wireless LAN Controller
- B. CleanAir reports on Cisco Prime Infrastructure
- C. Performance reports on Cisco Prime Infrastructure
- D. Interference Devices reports on Cisco Wireless LAN Controller
Answer: B
Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Apr2014/CVD-CampusCleanAirDesignGuide-APR14.pdf
NEW QUESTION 37
All APs are receiving multicast traffic, instead of only the APs that need it. What is the cause of this problem?
- A. The multicast group includes all APs
- B. The wrong multicast address was used
- C. Multicast IGMP snooping is not enabled
- D. The multicast group is assigned the wrong VLAN
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/74/configuration/guides/consolidated/b_cg74_CONSO
NEW QUESTION 38
Which three properties are used for client profiling of wireless clients? (Choose three.)
- A. MAC OUI
- B. IP address
- C. DHCP
- D. HTTP user agent
- E. OS version
- F. hostname
Answer: A,C,D
Explanation:
NEW QUESTION 39
During the EAP process and specifically related to the client authentication session, which encrypted key is sent from the RADIUS server to the access point?
- A. shared-secret key
- B. WPA key
- C. encryption key
- D. session key
Answer: D
NEW QUESTION 40
A customer wants the APs in the CEO's office to have different usernames and passwords for administrative support than the other APs deployed throughout the facility. Which feature must be enabled on the WLC and APs to achieve this goal?
- A. HTTPS access
- B. override global credentials
- C. local management users
- D. 802.1X supplicant credentials
Answer: B
Explanation:
Explanation
You can set a global username, password, and enable password that all access points that are currently joined to the controller and any that join in the future inherit as they join the controller. If desired, you can override the global credentials and assign a unique username, password, and enable password for a specific access point.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONS
NEW QUESTION 41
After receiving an alert about a rogue AP, a network engineer logs into Cisco Prime Infrastructure and looks at the floor map where the AP that detected the rogue is located. The map is synchronized with a mobility services engine that determines that the rogue device is actually inside the campus. The engineer determines that the rogue is a security threat and decides to stop if from broadcasting inside the enterprise wireless network. What is the fastest way to disable the rogue?
- A. Classify the rogue as malicious in Cisco Prime Infrastructure.
- B. Update the status of the rogue in Cisco Prime Infrastructure to contained.
- C. Go to the location where the rogue device is indicated to be and disable the power.
- D. Create an SSID similar to the rogue to disable clients from connecting to it.
Answer: B
NEW QUESTION 42
Which two statements about the requirements for a Cisco Hyperlocation deployment are true? (Choose two.)
- A. NTP can be configured, but that is not recommended.
- B. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.
- C. After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN controller must be restarted.
- D. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.
- E. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.
Answer: B,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/products/collateral/wireless/mobility-services-engine/datasheet-c78-734648.html
NEW QUESTION 43
A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?
- A. Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.
- B. Configure QoS on the mobile devices that have Jabber installed.
- C. Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned.
- D. Configure an AVC profile for the Jabber traffic and apply it to the WLAN.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/81/Jabber_in_WLAN/b_Jabber_in_WLAN.
NEW QUESTION 44
Which three properties are used for client profiling of wireless clients? (Choose three.)
- A. MAC OUI
- B. IP address
- C. DHCP
- D. HTTP user agent
- E. OS version
- F. hostname
Answer: A,C,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html
NEW QUESTION 45
A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC and is experiencing excessive channel utilization regardless of occupancy. Which action reduces channel utilization without removing SSIDs?
- A. Disable MCS data rates 0 through 11.
- B. Disable MCS data rates used by 40 MHz channels.
- C. Disable data rates that use CCK.
- D. Disable VHT data rates.
Answer: C
Explanation:
References: http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site- survey-guidelines-wlan-00.html
NEW QUESTION 46
An engineer needs to configure an autonomous AP for 802.Ix authentication. To achieve the highest security an authentication server is used for user authentication During testing, the AP fails to pass the user authentication request to the authentication server. Which two details need to be configured on the AP to allow communicator! between the server and the AP? (Choose two.)
- A. PAC encryption key
- B. Shared secret
- C. Username and password
- D. Group name
- E. RADIUS IP address
Answer: C,E
NEW QUESTION 47
CMX Facebook Wi-Fi allows access to the network before authentication. Which two elements are available?
(Choose two.)
- A. Allow SNMP traffic only before authentication and block all the traffic.
- B. Allow HTTPs traffic only before authentication and block all other traffic.
- C. Allow all the traffic before authentication and intercept HTTPS only.
- D. Allow all the traffic before authentication and intercept HTTP only.
- E. Allow HTTP traffic only before authentication and block all the traffic.
Answer: B,D
Explanation:
NEW QUESTION 48
A network engineer wants to implement QoS across the network that support multiple VLANs. All the Aps are connected to switch ports and are configured in local mode. Which trust model must be configured on the switch ports to which the Aps are connected?
- A. WMM UP
- B. DSCP
- C. IPP
- D. CoS
Answer: A
NEW QUESTION 49
The CTO of an organization wants to ensure that all Android devices are placed into a separate VLAN on their wireless network. However, the CTO does not want to deploy ISE. Which feature must be implemented on the Cisco WLC?
- A. AAA override
- B. custom AVC profile
- C. WLAN local policy
- D. RADIUS server overwrite interface
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html
NEW QUESTION 50
An engineer must run a Client Traffic Stream Metrics report in Cisco Prime Infrastructure. Which task must be run before the report?
- A. radio performance
- B. client status
- C. scheduled report
- D. software
Answer: A
Explanation:
Explanation
Text Description automatically generated
NEW QUESTION 51
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
- A. Trust DSCP
- B. Allow WMM
- C. Set QoS to Platinum
- D. Enable CAC
Answer: A
Explanation:
NEW QUESTION 52
An engineer is configuring multicast for wireless for an all-company video meeting on a network using EIGRP and BGP within a single domain from a single source. Which type of multicast routing should be implemented?
- A. Protocol Independent Multicast Dense Mode
- B. Protocol Independent Multicast Sparse Mode
- C. Source Specific Multicast
- D. Multicast Source Discovery Protocol
Answer: C
Explanation:
NEW QUESTION 53
Refer to the exhibit.
An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?
- A. It must be Outbound because it is traffic that is generated from the WLC.
- B. It must be Inbound because traffic goes to the WLC.
- C. Packet direction has no significance; it is always Any.
- D. To have the complete list of options, the CPU ACL must be created only by the CLI.
Answer: B
NEW QUESTION 54
......
Introduction to Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
It is a 90-minute test affiliated with the CCNP Service Provider and Cisco Accredited Professional-wireless networks Implementation certifications. Cisco 300-430: Implementing Cisco Enterprise Wireless Networks exam tests the candidate’s knowledge of different aspects of wireless networks and their core concepts, from the service provider. Different types of 310-430 practice test helps the students to prepare for the exam.
Download Real Cisco 300-430 Exam Dumps Test Engine Exam Questions: https://www.braindumpquiz.com/300-430-exam-material.html
Free 300-430 Sample Questions and 100% Cover Real Exam Questions : https://drive.google.com/open?id=1O6hjVhiS_YulCoVUJ4nO4-mLjIIHcDz2