Sample Questions

NewRocket requires a network connection between the main corporate building and a very small building on a campus. This connectivity needs to provide at least 700 Mbps throughput using a wireless solution. An AP will be placed inside each building's lobby near the entrance glass doorway that interconnects the two buildings. The distance between these two doors is approximately 30 feet (10 meters). The connection to the closest wiring closet in each respective building is approximately 280 feet (86 meters) for each AP. The customer needs a solution that will:

• Provide a dedicated 5 Ghz radio for lobby connectivity
• Provide meshing on a dedicated 5 Ghz radio to interconnect the two buildings with an appropriate integrated antennas

Which solution would best meet NewRocket's requirements?

• Aruba AP 500 with MMF cabling
• Aruba AP 374 with MMF cabling
• The Aruba AP 387 with Cat 7 cabling
• Aruba AP 535 with Cat 7 cabling

A network architect is analyzing the current wireless coverage in a new design. Standing 10 feet (approximately 3 meters) away from the AP, the architect tests the wireless signal from the AP. The architect then moves 20 feet (approximately 6 meters) away from the AP and repeats the test. Given that the architect detects no external interference with the signal, by how much would you expect the signal to degrade between the two tests?

• By a factor of 4
• By a factor of 2
• By a factor of 8
• By a factor of 1

A wiring closet with a POE+ switch is 300 feet (100 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is also capable of 10 Gbps. The cable type is Cat6a STP. What is the maximum speed that the customercan expect from the connected AP?

• 1 Gbps
• 5 Gbps
• 2.5 Gbps
• 10 Gbps

How would a network administrator view the price list of the equipment in one wiring closet?

• Create a Design Group in the site; set the filter in the BOM to the Design Group
• Create a Wiring Closet in the site; set the filter in the Design Group to Wiring Closet
• Create a Workspace in the site; set filter in the BOM to the Workspace
• Create a Design Group in the Site; set the filter in the Layers to Design Group

When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?

• Density of users
• Mobility requirements and usage
• Type of users
• Number of users per location

Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)

• Roaming between APs
• Determining the RF channel bandwidth consumed per Barcode scanner
• Providing consistent performance on all available channels
• Encountering RF interference by devices
• Implementing adequate security measures to ensure PCI compliance

A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.

Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements?

• Two 7030 mobility controllers in a cluster
• A standalone 7008 controller per floor
• Two 7205 mobility controllers in a cluster
• An IAP cluster per floor

Which must you perform in IRIS to assign a device to a Design Group?

• Right-click the device and select Set Layer Membership
• Right-click the device and select Set Design Group
• Drag and drop the device into the Design Group
• Drag and drop the device into the Site

A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards.

What type of survey should the network architect perform?

• Active
• Spectrum clearing
• Passive
• Virtual

How to Prepare For Aruba Certified Design Associate Exam

Preparation Guide for Aruba Certified Design Associate Exam

Introduction

This exam validates you have a fundamental knowledge of an Aruba network design and know the Aruba product lines to help you design the network with the assistance of a senior designer. Candidate should know how to read a customer request and extract the information needed for a wired or wireless network. Candidate should know how to use VRF and IRIS. HP HPE6-A66 practice exams and HP HPE6-A66 practice test will help you to understand and memorize the concepts and detailed answers and solutions.

Candidate should give this exam who want:

• To position yourself as a trusted team member who can contribute to the design of enterprise-wide Aruba campus wired and wireless networks.
• To validate you understand the fundamentals of designing an Aruba Mobile First Platform
• To advance your career as a certified professional

Reference: https://certification-learning.hpe.com/TR/datacard/Exam/HPE6-A66