Prepare with Microsoft : 070-582 exam braindumps as your best preparation materials

High rate of accuracy

In order to assist you pass the exam confidently, our 070-582 practice material includes annual real exam questions for you to practice. In this way, you can have a clear understanding about the 070-582 exam. Once you finish the whole test and click to submit, our system will grading your paper automatically. It will cost no more than one minute to scoring. All the questions ad answers of the real exam absolutely have no problem. Also, our specialists will compile several sets of 070-582 model tests for you to exercise. We strongly advise you to take our model tests seriously. You must do it carefully and figure out all the difficult knowledge. Actually, our hit ratio of the 070-582 exam is the highest every year. Our workers can predict the question types accurately after long analyzing. Therefore, most examinees are able to get the Microsoft MCTS certificate with the aid of our test engine.

Support offline usage

It is impossible for you to stay in a place where there has internet service for a long time. After all, you are busy with many things in daily life. Our App version of the 070-582 exam braindumps can resolve your problem. You just need to open the App version of the study guide with a fast internet connection for the first time. All the contents of the 070-582 test quiz will be downloaded on your electronic equipment. Then you can use the 070-582 practice material freely. It is a great innovation of our practice exam. Offline usage of the 070-582 exam braindumps brings much convenience to users. You have more freedom and less restriction. Our company focuses our attention on offering the best 070-582 test quiz for you. Just enjoy your life.

Instant download

You must be tired of the complicated download process of the 070-582 practice material. Now, you can enjoy a much better test engine. Our download process is easy for you to operate. We have simplified the download process of the 070-582 exam braindumps. You just need to follow the instruction. Once you receive our emails, you just need to click the link address in a fast network environment. Then the system will download the 070-582 test quiz quickly. You do not need to download other irrelevant software on your computer during the whole process. It takes you at most one minute to download the 070-582 exam braindumps successfully.

Many successful people are still working hard to make new achievements. So you have no excuses for your laziness. Perhaps you always complain about that you have no opportunity. In fact, you just suffer from inadequate capacity. Now, our 070-582 exam braindumps can improve your career. You must refresh yourself from now. As we all know, preparing the Microsoft 070-582 exam is a boring and long process. Only a small number of people can persist such a long time. Luckily, our study guide can reduce your pressure. You will make rapid progress after learning on our 070-582 test quiz.

DOWNLOAD DEMO

Microsoft 070-582 Exam Syllabus Topics:

Microsoft Windows Embedded Standard 7 for Developers Sample Questions:

1. You are developing a Windows Embedded Standard 7 image. You need to implement a recovery method on the hard disk that contains the image. What should you do?

A) Use the Diskpart tool to create a second partition. Use the lmageX.exe tool to apply the WindowsPE Boot.wim file to the partition. Copy the Bootmgr file and the \boot directory to the root of the partition. Create a new boot configuration database to enable booting from the partition.
B) Use the Diskpart tool to create a recovery partition on the hard disk that contains the image. Copy the WindowsPE source files to the hard disk drive. Use the Diskpart tool to mark the partition as Read-Only.
C) Use the Diskpart tool to create a second partition on the hard disk. On the device that contains the image, access the Control Panel/System and Security feature and select the Backup and Restore option. Select the Create a System Image option and place the image on the second partition.
D) Start the device that contains the image by using WindowsPE. Use the lmageX.exe tool to append the WindowsPE Boot.wim file to the target image file. Add the system recovery image to the partition.

2. A Windows Embedded Standard 7 image is deployed to Ethernet-enabled, handheld devices.
You need to ensure that the devices can be updated periodically without being re-imaged.
What should you do?

A) Create an answer file by using the updated packages. From the %SystemRoot%\System32\Sysprep directory, run the Sysprep /unattend:AutoUnattend.xml command on each device.
B) Create an answer file and a configuration set by using the updated packages. Run the PkgScn/Get-Packages /ConfigSetDir:<path to configuration set answer file> command on each device.
C) Create a distribution share
by
using the
updated packages.
Re-configure the images answer file to point to the new distribution share. Start each device to WindowsPE and run the setup /unattend:AutoUnattend.xml command.
D) Run the Pkgscn /Find-Updates /PackagePath:<path to packages> /ConfigSetDir:<path to configuration set> command on each device to create a configuration set. Run the DISM /online /Apply_Unattend:AutoUnattend.xml command by using the answer file for the configuration set.

3. You are updating a Windows Embedded Standard 7 Windows Image (WIM) file. You need to add an out-of-box device driver to the image by using the minimum amount of administrative effort. What should you do9

A) Deploy the image to a target device by using WindowsPE and the lmageX.exe tool. Install the device driver by using the DPInst.exe tool. Capture the deployed and updated image by using the lmageX.exe tool.
B) Mount the image by using the lmageX.exe tool. Add the device driver by using the PkgMgr.exe tool. Dismount the image and commit the changes.
C) Create an answer file by setting the value of the WindowsEmbedded/PnPCustomizationNonWinPE option in the DriverPaths setting to the location of the driver files. Set the configuration pass as offlineServicing. Mount the image by using the DISM tool.Run the DISM /lmage:<path to image file> /Apply_Unattend:"answerfile.xml" command on the image.
D) Mount the image by using the DISM tool.Add the device driver by using the DISM /lmage:<path to image file> /Add-Driver/Driver:"driver.inf" command. Dismount the image and commit the changes.

4. You are creating a Windows Embedded Standard 7 image for a target device. You have a third-party driver for a plug-and-play USB device. You have an INF file and binary files for the driver. The USB device will be attached to the target hardware device after the device is deployed. You need to add the third-party driver to the image. What should you do in Image Configuration Editor (ICE)?

A) From the distribution share, add the third-party driver from the Out-of-Box Drivers folder. Configure the settings to install the driver during the offlineServicing pass.
B) Insert a synchronous command during the WindowsPE pass to install the third-party driver.
C) Configure the DriverPaths setting of EmbeddedEdition_x86 during the WindowsPE pass to install the third-party driver.
D) Insert a synchronous command during the Specialize pass to install the third-party driver.

5. You are developing a Windows Embedded Standard 7 image. The target device has no display. You deploy an application that displays custom dialog boxes. You need to configure the image to automatically provide an answer to each custom dialog box. What should you do?

A) Add and configure the Dialog Box Filter package.
B) Configure the Windows Embedded Core component.
C) Add and configure the Message Box Default Reply component.
D) Add and configure the Shell Controls and Ul Support Functions package.

Solutions: