We're so confident of our products that we provide no hassle product exchange.
HP Servicing HP BladeSystem Solutions Sample Questions:
1. A customer has a c7000 enclosure that is fully populated with BL680c blades. Two months after the initial installation, the rack initiates a thermal shutdown. When diagnosing the problem, you find there is not enough space to get behind the unit. You pull all the units out but find no problems with the chassis, blades, or their cooling systems.
What is a potential cause for the thermal shutdown?
A) There is insufficient air circulation causing hot air from the rear of rack to be fed back to the equipment through the front of the rack.
B) The cooling system temperature in the data center is set too low This results in the enclosure cooling fan system rotating at a lower RPM and not removing enough of the thermal heat.
C) The blade enclosure's fan system is not strong enough to remove the thermal heat generated in a fully populated enclosure.
D) The rack is too close to the cold air outlet. The hot air area is too large, and the cooling system is unable to recirculate the hot air effectively.
2. How should you save a Virtual Connect configuration?
A) domain setting, backup/restore
B) enclosure setting, configuration scripts, inventory
C) enclosure setting, configuration scripts, show config, save
D) from CLI: show all > cfg.txt
3. Which HP tool is used to configure NIC teaming on a Windows server?
A) NCU
B) ORCA
C) RBSU
D) PCM+
4. Which mezzanine card allows Fibre Channel and Ethernet connectivity through the same interconnect module?
A) HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
B) HP NC553m 10Gb 2-port FlexFabric Adapter
C) Brocade 804 8Gb FC HBA for HP BladeSystem c-Class
D) HP NC382m Dual Port 1GbE Multifunction BL-c Adapter
5. Which statements are true about Online Spare memory banks? (Select two.)
A) Memory banks must be populated sequentially, starting with bank A.
B) The first bank populated is considered the Online Spare bank.
C) The last bank populated is considered the Online Spare bank.
D) If single-rank and dual-rank DDR-1 DIMMs are used, the banks must first be populated with dual-rank DIMMs.
Solutions:
| Question # 1 Answer: A | Question # 2 Answer: A | Question # 3 Answer: A | Question # 4 Answer: B | Question # 5 Answer: A,C |
By Randolph
