How to Prepare For Huawei Implementing Enterprise Switching Network Training

Preparation Guide for Huawei Implementing Enterprise Switching Network Training

Introduction

The HCNP-R&S-IESN course has been designed to understand the technical knowledge around the principles of Ethernet, QinQ, 802.1X,STP/RSTP/MSTP, MPLS VPN, MPLS LDP, and DHCP technologies in an enterprise network. The course modules target the understanding of Ethernet application and configuration. The course outlines and explains the Huawei Ethernet switches and how they can be networked. Configuration of STP, MSTP and RSTP are also covered during the course delivery. The HCNP-R&S-IESN exam covers principles, configuration, and application of Ethernet, VLAN, QinQ, STP/RSTP/MSTP, 802.1X, DHCP, MPLS LDP, and MPLS VPN technologies in enterprise networks, and knowledge and networking application of Huawei Ethernet switches. VLAN technology provides flexible control for Ethernet, and is applied widely.Huawei H12 222 practice exams and Huawei H12 222 practice test will help you to understand and memorize the concepts and detailed answers and solutions.

The HCNP-R&S-IESN exam covers principles, configuration, and application of Ethernet, VLAN, QinQ, STP/RSTP/MSTP, 802.1X, DHCP, MPLS LDP, and MPLS VPN technologies in enterprise networks, and knowledge and networking application of Huawei Ethernet switches. With an HCNP-R&S certification, you demonstrate a comprehensive and thorough understanding of small and medium-sized networks, including general network technologies, and the ability to design small and medium-sized networks independently and implement the designs using Huawei routing and switching devices.

With engineers who are HCNP-R&S certified, enterprises are able to construct complete small and medium-sized networks and integrate voice, wireless, cloud, security, and storage technologies into their networks in order to support a variety of applications while providing enhanced security, availability, and reliability.

Candidate should give this exam who want:

• Configure STP, RSTP and MSTP
• Configure VLAN, Mux VLAN, Super VLAN and QinQ
• Describe the principle of VLAN, QinQ, STP, RSTP and MSTP

Sample Questions

Agile Controller, as a network resource automation control system, can provide unified policy engine and implement unified access strategy in the whole organization. It can realize based on user identity, access time, access location, terminal type, terminal source and access mode (For shot: 5W1H) certification and authorization.

• True
• False

Adopting QoS in the network, while improving the service quality of certain kinds of business, it will certainly damage the service quality of other business.

• True
• False

What is the configuration command that associates VRRP with BFD?

• track vrrp vrid 1 bfd-session session-name 1 reduced 100
• bfd-session vrrp vrid 1 track session-name 1 reduced 100
• vrrp vrid 1 track bfd-session session-name 1 reduced 100
• vrrp vrid 1 track bfd-session-name 1 reduced 100

When configuring a RADIUS server template on Huawei switches, which of the following options are optional configuration parameters?

• shared-key
• Accounting server address and port
• Authentication server address and port
• RADIUS automatically detects users

In MPLS, it has different ways for label distribution when using LDP, the following descriptions about LDP lable distribution way, which are wrong? (Multiple Choice)

• Using an ordered manner, when an LSR is the originating node of a route, the LSR does not need to wait for the next-hop tag mapping to send the mapping to the upstream.
• The LDP label control can mark by Odered manner
• LDP label control can not use the independent way to mark.
• Using a standalone mode, the LSR can send a label mapping to the upstream LSR and must wait for a label mapping message from the next hop of the LSR.

There is a difference between RSTP protocol and STP protocol, in RSTP protocol when defining port status, which port states are defined?

• Discarding state
• Forwarding state
• Learning state
• All of the above

When configuring and achieving STP protocol, each running STP agreement's switch in the network all have a unique ID, what is the ID?

• two bytes length's switch priority
• six bytes length's switch priority and the six-byte length's MAC address
• two bytes length's switch priority and the six-byte length's MAC address
• six bytes length's MAC address

When running the STP agreement on the switch, the switch just being started is in the initialization stage and thought itself is the root switch, which of this time's BPDU parameter settings is correct? (Please select 3 answers)

• Designated Cost is 0
• Designated Port is 0
• Designated Bridge is the switch itself
• Designated Root is the switch itself

The following is a switch configuration command,

(SWB) STP enable (SWB) STP mode STP (SWB) the STP priority 8192

Which description is correct? (please select 3 answers)

• By default, Huawei switches operating mode is the traditional STP mode.
• stp enable is used to start switch's STP function, by default, the switch's STP function is in the enabled function.
• the priority of the switches, the range is 0 - 61440, the step length is 4096, namely the switch can set 16 priority values, such as 0, 4096, 8192.
• stp priority commands is used to configure the switch priority, by default, the switch priority value is 32768.

Reference: https://support.huawei.com/learning/Certificate!toExamOutlineDetail?lang=en&nodeId=Node1000003919